Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Summerlin
If you live in Summerlin, your gate is probably iron, probably older than your kids, and probably bolted to an operator that was undersized the day it went in. We work on exactly that kind of gate. Vance Gate Repair handles hinge replacement, post resetting, rail repair, and on-site welding for Summerlin homeowners, and we price the job in writing before anyone picks up a tool. A live person answers the phone at (844) 320-7587 at any hour, and every visit ends with a photo record of what we found and what we changed. That matters more in Summerlin than most places, and this page explains why.
Why Vance Gate Repair Boulder City Is Summerlin’s Preferred Gate Parts & Welding Company
Summerlin homeowners tend to call us after they’ve already been told something vague. They want the number on paper. Under the Haven Standard, the flat price is written and handed over before work starts (Clause 1: Have it in writing), and under Clause 4 there’s a documented photo record on every job, at no extra charge. That combination is why we get repeat calls from the villages off Sahara and Hualapai rather than one-time visits.
Summerlin work also means compliance. Repairs that touch visible ironwork have to hold up to village architectural review, and we plan for that from the first visit rather than after the fact. Our technicians bring up to 12 years of experience to loaded gates, dragging side-yard gates, and welded repairs where the finish has to match. Every completed repair carries the 365-Day Done Right Promise: if it’s not right within a year, we make it right, no argument and no fee. Bring us a written estimate from another company and we’ll review it free of charge.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Summerlin

The sub-services below are the ones Summerlin calls about most. If yours isn’t here, it’s still likely on the Gate Parts & Welding service page, and it’s worth a call either way.
Hinge Replacement in Summerlin
Most dragging gates we see in Summerlin aren’t failing in the middle – they’re sagging at the hinge, where iron hinges have worn against a post that’s shifted a little each summer. We check the hinge post and footing before we touch the panel, then replace or re-pin the hinges to match load and travel. On heavy driveway leaves, going up a hinge gauge is often the cheaper long-term answer than replacing the gate.

Post Replacement in Summerlin
Caliche-heavy soil around Summerlin footings expands and contracts hard through the year, and monsoon winds finish the job. When a post is leaning past reasonable adjustment, resetting or replacing it is the fix; shimming a bad post only buys a season. We set the new post, then confirm the gate swings clean through its full arc before we call it done.

Rail Repair in Summerlin
Rails take the worst of the July heat. Iron that bakes past 150°F in direct sun develops hairline cracks at rail welds, and those cracks open faster once the gate starts binding. We repair cracked or bent rails on site where the design allows, and match the section to the existing profile so the repair reads as part of the gate rather than a patch.

Custom Welding in Summerlin
Field welding on a Summerlin gate has to be clean enough to take the finish the village expects, so we prep, weld, and dress the joint rather than leaving a proud bead. Weld repairs and hardware swaps that affect visible ironwork are matched to the existing style. If approval is needed before the visible work proceeds, we flag that on the written scope so nothing gets built twice.
Before
AfterTrusted Brands We Service in Summerlin
We work on whatever motor is already on your property rather than steering you toward a replacement. That includes LiftMaster and Linear operators, the two most common builder-grade units on Summerlin gates, plus FAAC and Mighty Mule where a homeowner has added automation to a formerly manual gate. We don’t stock parts locally, so turnaround depends on the part – but we’ll tell you the lead time on the written quote, not after the fact. Nine major automation brands in all, which means one company can handle the motor and the ironwork on the same visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Summerlin Homes

- Builder-grade operators on gates that were never designed for automation. Undersized hinges, no conduit run, and no power at the hinge post. These typically slow or quit within a few summers, especially on 1990s and 2000s Mediterranean-style homes.
- Welds cracking in the July heat. Iron gates in direct Summerlin sun get hot enough that weld failures and hinge binding show up in clusters each summer rather than gradually.
- Posts shifting in caliche-heavy soil. Seasonal expansion plus monsoon wind moves the footing, so the gate sags at the hinge post and drags instead of failing in the middle.
- HOA mismatch after an off-the-shelf swap. Replacing hardware or a panel without matching the village’s approved finish creates a compliance problem the homeowner inherits.
Pricing for Gate Parts & Welding in Summerlin, NV
Summerlin isn’t the cheapest market in the valley to have ironwork done, but it’s not the most expensive either. A typical hinge replacement in Summerlin runs $150 – $350 for a standard pair, depending on hinge gauge and whether the post needs adjustment. Post replacement generally runs $400 – $900 once you account for digging out a caliche footing and resetting the gate. Rail repair is usually $200 – $550, and custom field welding runs $250 – $700 depending on finish prep. Power and conduit runs for adding automation to a manual gate are quoted separately because the run length and trenching are site-specific. We don’t give a “call for a quote” answer – the price range goes on the page, and the exact flat price is written and handed to you before any work begins.
We Also Serve Cities Near Summerlin

We work throughout the west valley and beyond, including Spring Valley, Las Vegas, Winchester, and Paradise. Same written pricing, same photo record, same 365-Day Done Right Promise. If you’re just over the line from a Summerlin village, the job is the same – though the compliance layer may not apply. Start with Gate Parts & Welding in Summerlin if you’re inside the master plan, or call and we’ll tell you which rules apply where you live.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Summerlin

More than bolting on a motor: you need a power run to the gate, a conduit path to protect the low-voltage wiring, entrapment protection, and a hinge assembly rated for driven load. Most builder-installed gates in Summerlin were never given a conduit run or power at the hinge post, so that gets planned first. If the hinges or post can’t carry the load, the operator will wear out early no matter which brand you pick. Call (844) 320-7587 for a free written estimate.
The post footing moves with the soil, so seasonal expansion pushes the gate out of alignment when the ground dries and heats. Caliche-heavy soil plus monsoon wind makes this common in Summerlin, and the drag shows up at the hinge post rather than in the panel. The fix is usually re-setting or adjusting the post, not replacing the gate. Call (844) 320-7587 – estimates are free.
In most Summerlin villages, yes – replacements and visible ironwork have to match the village’s approved design and finish, and approval usually has to be in hand before the work proceeds. That’s the compliance layer that older unincorporated Clark County neighborhoods next door don’t impose. We flag approval requirements on the written scope so you’re not building twice. Call (844) 320-7587 and we’ll tell you what to plan for.
At minimum, a pair of photo-eyes (the infrared beams that stop or reverse the gate if something crosses the path) plus a monitored safety edge on the closing side of a swing gate. We check alignment, verify the beams are set within spec, and photograph the readings before we leave. Undersized hinges and misaligned photo-eyes are the most common pair we see on Summerlin gates. Call (844) 320-7587 for a free estimate.
Yes, if the joint is prepped and dressed before finish is applied – a clean field weld, ground down, primed, and painted to match the existing village-approved color will hold up and read as original. Skipping the dressing step is what makes a field repair look like a patch, and that’s the kind of mismatch that trips HOA review. Call (844) 320-7587 for a written scope and price before work begins.
Whether it’s a dragging side-yard gate, a cracked rail weld, or a builder-grade operator that’s finally given up, call Vance Gate Repair at (844) 320-7587 for a free estimate. The written price is in your hands before any work starts, every visit leaves a photo record, and the 365-Day Done Right Promise covers the repair for a full year. Call anytime – a live person answers, day or night.
Written by the team at Vance Gate Repair Boulder City.