A Vance company - serving Boulder City, NV
Gate Parts & Welding in Sunrise Manor, NV | Vance Gate Repair Boulder City

Gate Parts & Welding in Sunrise Manor - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Sunrise Manor

If your driveway gate is dragging, leaning, or rattling in the wind, the fix starts with knowing which part actually failed. We handle Gate Parts & Welding for Sunrise Manor homeowners – hinge replacement, post replacement, rail repair, and custom welding – with a written price before anyone picks up a tool. We know this side of the valley well: the ranch tracts off Lamb Boulevard, the older blocks near Sunrise Mountain, the 89110 properties where gates were hung decades ago and never re-set. When a spring gust takes a gate down, call (844) 320-7587 and a live person answers, day or night. You’ll get a flat price in writing and a photo record when we leave.

Call (844) 320-7587

Why Vance Gate Repair Boulder City Is Sunrise Manor’s Preferred Gate Parts & Welding Company

Most of the gates we open in Sunrise Manor were hung before modern safety standards existed, and the parts on them have been patched, bent, and re-bolted more than once. We’re the crew that documents what’s actually there – the hinge that’s seized, the control board that’s obsolete, the post that’s rotted below grade – instead of guessing and replacing blindly. That habit comes from commercial access-control work that carried over to every residential driveway gate we touch. Under The Haven Standard, every Sunrise Manor job gets a written scope, a written price, and photographic evidence on the day.

What homeowners here tell us they want is simple: evidence. They’ve read the reviews, they’ve had a verbal estimate before, and they want the number on paper before anyone starts. That’s Clause 1 of the Haven Standard – have it in writing – and it holds on every visit. If a repair isn’t right, the 365-Day Done Right Promise gives us a full year to make it right at no extra charge. Our technicians have up to 12 years of experience, and we service nine major automation brands, including the LiftMaster and Linear operators that dominate older Sunrise Manor properties. A live person answers our phone at any hour, so no voicemail loop stands between you and a straight answer.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Sunrise Manor

professional gate repair service
Our Gate Parts & Welding Services in Sunrise Manor

Sunrise Manor’s gate work is mostly a fight against age and desert weather. The 1960s – 80s ranch homes here sit on shallow desert post footings, and many driveway gates were originally hung on 4×4 wood posts set only 18 – 24 inches deep. Decades of spring gusts over 50 mph have torqued those posts into the leaning, rust-locked hinge posts we find today. Here’s how we handle the four jobs that come up most.

Hinge Replacement in Sunrise Manor

When a gate swings hard, drags on the ground, or won’t latch, the hinges are usually the culprit – or the first visible symptom of a post that’s moved. Rust-locked hinges on 1970s and ’80s gates seize solid after years of desert dust and 110°F heat, and a seized hinge pulls the whole panel out of square. We replace the hinge, re-set the alignment, and photograph the new hardware position before we leave. Hinge replacement in Sunrise Manor typically runs $95 – $220 per hinge depending on gate weight and whether the hinge plate needs welding.

Hinge Replacement in Sunrise Manor

Post Replacement in Sunrise Manor

A sagging gate usually points to a rotting wood hinge post below grade, not the panel itself. That’s the most common real fault we find here: the gate looks fine, but the post has shifted after a windstorm pushed the whole gate sideways. We dig out the old footing and re-set a steel or deeper-set hinge post in concrete, then re-hang the hardware so the gate swings true. Post replacement in Sunrise Manor typically runs $350 – $850 depending on post depth, footing size, and whether the gate is a single swing or a double.

Post Replacement in Sunrise Manor

Rail Repair in Sunrise Manor

Sun-baked wood goes brittle, and a brittle rail cracks at the fasteners first. We splice, sister, or replace damaged rails and re-brace the frame so the gate stops flexing every time it moves. Rail repair in Sunrise Manor typically runs $150 – $420 depending on how many rails are damaged and whether the gate is wood or welded steel.

Rail Repair in Sunrise Manor

Custom Welding in Sunrise Manor

Bent frames, cracked hinge plates, and broken weld joints on steel gates get repaired at the joint, not swapped out for a new gate. We weld on-site and document the repair with a photo record and the part or plate we installed. Custom welding in Sunrise Manor typically runs $120 – $400 for a small repair, more for a full frame re-weld.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 320-7587

BeforeBefore
AfterAfter

Trusted Brands We Service in Sunrise Manor

Older Sunrise Manor properties tend to carry legacy operators – LiftMaster and Linear swing and slide motors that have been running since the ’90s, plus the DoorKing and Elite boards that show up on light-commercial gates along the major roads. We service all nine major automation brands and don’t steer anyone toward a replacement when a repair will do. We don’t stock parts locally; the first visit is diagnostic, and parts get ordered to match the brand and model we find. That means one diagnostic visit, a written quote, then a scheduled return with the right part in hand – and a documented photo record on both.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Sunrise Manor Homes

Technician applying sealant to a weathered metal gate post cap repair
Common Gate Parts & Welding Problems We See in Sunrise Manor Homes
  • Rotting wood hinge posts below grade. The gate looks fine until a 50 mph spring gust pushes the whole panel sideways, because the post has quietly rotted for years. A qualified local pro digs out the old footing and re-sets a steel or deeper-set hinge post in concrete before re-hanging the hardware.
  • Rust-locked hinges and latches on ’70s – ’80s gates. Years of desert dust and 110°F heat seize these solid, and a seized hinge pulls the panel out of square until it drags on the ground. We replace the hinge, re-set the alignment, and photograph the new position.
  • Obsolete control boards on legacy operators. Older LiftMaster and Linear boards lose logic and can’t be re-flashed. We check whether the board can be sourced, or whether an entrapment-protection retrofit on the existing motor is the cheaper answer.
  • Dead safety photocells. A photo-eye (the infrared beam that stops the gate if something crosses the path) that no longer trips is an entrapment hazard, not a nuisance. We test the beam, replace the unit, and confirm the gate reverses under Clause 4’s evidence requirement.
Get the price in writing before anything starts.Serving Sunrise Manor - a real person answers, day or night.
Call now

Pricing for Gate Parts & Welding in Sunrise Manor, NV

Here’s what the work actually costs in this market, with the price written and handed over before any tool comes out. These are typical ranges, not teasers:

  • Hinge replacement: $95 – $220 per hinge
  • Post replacement: $350 – $850
  • Rail repair: $150 – $420
  • Custom welding: $120 – $400 for small repairs, more for a full frame re-weld
  • Safety photocell replacement on a legacy operator: $140 – $280

What moves the number: gate weight, whether a hinge plate needs welding, post depth and footing size, and whether the operator is a legacy board that needs sourcing. Estimates are free, and Clause 1 of the Haven Standard means the price you agree to is the price you pay – no surprise invoice at the end. Call (844) 320-7587 for an exact quote in writing.

We Also Serve Cities Near Sunrise Manor

A professional welder performing wrought iron gate repair services
We Also Serve Cities Near Sunrise Manor

We serve Sunrise Manor and the surrounding east valley. If you’re just across the line in Whitney, Winchester, Las Vegas, or North Las Vegas, the same written-price, photo-record process applies. Sunrise Manor is our home base for this stretch of the valley, and we regularly work across the surrounding neighborhoods and the major roads that connect them. Wherever you are, the call is the same: (844) 320-7587.

Serving Sunrise Manor, NV – Our Local Coverage Area

We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Sunrise Manor

Professional welder performing metal gate repair and installation on a fence post
FAQs – Gate Parts & Welding in Sunrise Manor

Why Sunrise Manor Chooses Vance Gate Repair Boulder City

We set the standard for gate parts & welding in Sunrise Manor.

30-60 Min Response

Fast dispatch across Sunrise Manor. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Sunrise Manor

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Sunrise Manor - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Sunrise Manor Customers Say

Trusted by homeowners across Sunrise Manor and surrounding areas.

★★★★★

"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."

Wes A.
★★★★★

"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."

Terrence B.
★★★★★

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

Douglas N.

Ready for Gate Parts & Welding in Sunrise Manor?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Sunrise Manor.

(844) 320-7587

Request a Free Estimate in Sunrise Manor

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch