Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Enterprise
If your driveway gate is dragging, tripping mid-cycle, or refusing to swing open, the fix usually starts with a diagnosis, not a sales pitch. Vance Gate Repair works on gates across Enterprise, and we’ll tell you what’s wrong, what it costs, and what we left behind, in writing. Enterprise is HOA country, so that often means checking the community’s architectural rules before anyone touches a hinge. Call (844) 320-7587 and a live person picks up, any hour.
Why Vance Gate Repair Boulder City Is Enterprise’s Preferred Gate Repair Company
Enterprise homeowners research before they dial, and we write our pages the same way. Every job runs under The Haven Standard: a written price before work starts, a photo record of what was found and what was set, and the 365-Day Done Right Promise if a repair doesn’t hold. We service nine major automation brands, so whatever motor is already bolted to your fence, we can work on it rather than push a replacement.
Response to Enterprise is measured in the same or next business day for most repair calls, because our independent local professionals work the southwest valley every week. We know the difference between a builder-grade LiftMaster that’s simply worn out and a gate that’s binding because the hinge post moved. And because we don’t own trucks or stock shelves, we’re not steering you toward the part we happen to have on hand. We’re steering you toward the correct fix. We also prepared a free second opinion on any written estimate from another company. Bring the paperwork and we’ll review it at no cost.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Enterprise

The short list of what we actually get called to Enterprise driveways for. Everything is diagnosed first, photographed, and quoted in writing before a tool comes off the truck.
Hinge & Post Repair
This is the most common call we get in Enterprise, and it’s almost always the post, not the panel. In master-planned tracts off the 215 and Blue Diamond, a swing gate that has baked through a decade-plus of 110°F summers starts to drag, then trips the gate operator mid-cycle because the hinge post has shifted in the desert soil. We diagnose the footing first, then re-set or correct the post before touching hardware.

Gate Realignment
A gate that scrapes the ground or drags at the latch is usually out of square, not broken. After dust storms, grit in the tracks and rollers on courtyard gates makes sticking worse. We realign the gate, clear the grit, and set travel correctly so the operator isn’t fighting the panel.

Electric Gate Repair
If your electric gate in Enterprise stops mid-swing, the fault could be the operator, a limit switch, or the panel binding. We diagnose each, including testing that the safety photocell still reverses when something crosses the path before we call it fixed. Our Gate Repair team handles the full range, from a single limit-switch reset to control-board replacement on an older DoorKing unit.

Automatic Gate Repair
Automatic gates fail in patterns. Keypad and loop detector calls come in right alongside mechanical ones because the builder-grade openers from the 1990s and 2000s are now at the end of their hardware lifespan. Whether it’s a LiftMaster arm that won’t retract or an Elite control that keeps faulting, we fix the system, not just the symptom.
Before
AfterTrusted Brands We Service in Enterprise
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. It’s a long list on purpose. If your gate came with the house, or a previous owner swapped the motor, we can work on whatever’s already there rather than telling you to start over. We don’t stock parts on a truck, so the right part gets ordered or sourced when it’s needed, and the finish on any replaced hardware is matched to what your community’s CC&Rs actually call for. Turnaround on common parts is usually within a few business days. We’ll tell you the honest timeline when we quote.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Enterprise Homes

Enterprise is a master-planned edge of Las Vegas, and nearly every home here sits inside an HOA. So a gate repair is really two jobs: fixing the hardware and matching the community’s approved style, height, and finish. Here’s what we run into.
- Hinge post movement in the desert soil. The post shifts, the gate sags, and the operator can’t push through. It’s the number one dragging-gate call in Enterprise, and dust storms make it worse by dropping grit into the tracks.
- Builder-grade hardware at end of life. Openers, keypads, and loop detectors installed when these tracts went up are now failing together, so a keypad call often turns into an operator diagnosis too.
- Finish mismatches flagged at architectural review. A repaired or replaced gate in the wrong powder-coat color or iron pattern gets rejected by CC&Rs even when the repair itself is sound. We match color and pattern before we install anything.
- Heat and warp on metal gates. Wrought-iron panels expand and warp through 110°F summers, and vinyl fades and cracks. We check for heat-related distortion before we assume a bent hinge is the whole story.
Pricing for Gate Repair in Enterprise, NV
Here are the ranges we actually quote in Enterprise and 89139. A hinge and post re-set typically runs $180 to $420, depending on whether the post footing needs re-pouring. Gate realignment usually lands between $120 and $260. Electric and automatic gate repairs, including an opener or control-board fix, run $150 to $550 depending on the brand and the part. Lock and latch repair sits around $90 to $200. What pushes a job toward the top of the range is whether the hardware is original builder-grade, whether a new part has to be sourced, and whether a finish has to be matched through your HOA’s architectural review. You’ll get the exact flat price in writing before any work starts, and it doesn’t change after.
We Also Serve Cities Near Enterprise

Enterprise sits next to Spring Valley, Paradise, Winchester, and Henderson, and we take repair calls across all four. The rules change once you cross into neighboring unincorporated Clark County, where the HOA layer that shapes gate work here often drops away entirely. If you’re comparing options across the southwest valley, our Gate Repair in Enterprise page explains the local approval step in full.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Enterprise

Yes, if the repair changes the gate’s appearance, height, or style, most Enterprise HOAs require architectural review approval first. A like-for-like hardware fix usually doesn’t trigger the review, but a replaced panel, a new finish, or a different iron pattern does. We’ll tell you on the diagnosis which repairs are cosmetic changes and which sit inside the scope, and we document color and pattern so the approval package is ready.
The homeowner owns the driveway gate and its operator, so repair is your responsibility. The HOA owns the shared entry systems, common gate loops, and resident access hardware. If your keypad or loop detector is at a shared community entrance, contact the management company first. If it’s your own driveway gate in Enterprise, that’s ours to fix.
It’s almost always the safety photocell, sometimes a binding panel. The infra-red beam that stops the gate if something crosses its path gets knocked out of alignment by dust or a bumped post, and the operator reads it as a hazard. We re-aim the photocell, clear the obstruction, and confirm it reverses correctly before we sign off. If the gate itself is dragging, the operator can’t push through and trips the motor instead.
All nine of the big ones: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate came with the house or an earlier owner swapped the motor, we work on whatever’s already installed. No steering you toward a replacement when a repair will do.
The post, in most Enterprise calls. If the panel sags at one end or drags along the ground, the hinge post has moved in the desert soil, not the panel bending. We check the footing first and re-set the post if needed, then realign the gate and re-test the operator. Fix the post and the sag usually goes with it.
If you’re in Enterprise and your gate needs a look, call (844) 320-7587 for a free estimate. We’ll tell you what we found, what it costs in writing, and what we left behind. A live person answers, day or night.
Written by the team at Vance Gate Repair.