Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Access Control in Boulder City: What to Know First
We provide independent Ghost Controls gate access control service in Boulder City, and most access-control faults we see on Ghost Controls systems are diagnosed and repaired in a single visit. Expect a written price before any tool comes out, a photo record of what we found and what we set, and a repair backed by our 365-Day Done Right Promise. As an independent Ghost Controls service provider, we’re not affiliated with or authorized by the manufacturer. This page is for Boulder City homeowners running a Ghost Controls operator who need keypad entry, remote control, phone entry, card reader, video intercom, or smart access working reliably on a driveway gate. Call (844) 320-7587 and a live person answers, day or night.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls builds a popular DIY-friendly residential operator, and that shows up in the specific ways their systems fail. Here’s what we actually find on Boulder City gates.
- Keypad boards that die from sun and monsoon dust. The wireless keypads on Ghost Controls AXO and TSS1 systems sit in direct desert sun and collect fine dust in the button membrane. When a button stops registering, owners usually assume the whole unit is dead. More often the keypad board or its battery pack has taken on moisture and grit. We pull the pad, test the board, replace the keypad or its battery housing, and re-seal the mount.
- Remotes that lose their programming after a power event. A Ghost Controls receiver can forget paired remotes when the control board sees a voltage spike or a low-battery brownout. It looks like the remote failed, but the pairing is gone. We re-pair each remote, confirm signal strength at the gate, and photograph the receiver so you have a record of what’s connected. If a remote’s range has faded, that’s usually the remote battery, not the operator.
- Photo-eye misalignment on sagging gate posts. The safety photo-eye (the infrared beam that reverses the gate if something crosses its path) loses alignment when a wood or steel post shifts in our expansive desert soil. On Ghost Controls systems a beam out of alignment by an inch or two can stop the gate mid-travel. We realign the eye, check the run, and note the post movement so you know whether the post needs attention too.
- Limit switches knocked out of set on dual-gate systems. On Ghost Controls dual-gate setups, a single leaf’s limit switch drifting even a few degrees will throw both leaves out of sync. The gate stalls or overshoots and the access control stops responding correctly. We read the limits, reset them to spec, and photograph the new positions before we leave.
- Smart-access modules that lose their Wi-Fi link. Ghost Controls smart-access add-ons drop off the home network when the router changes bands or the gate-side module loses power. Owners call thinking the operator failed when it’s the network link. We reconnect the module, verify the app controls the gate, and test the manual release so you’re never locked out if the network drops again.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Access Control Process

- 1
Call diagnostics. We ask what the gate is doing, what changed, and which Ghost Controls system you have, so the technician arrives with the right parts on hand.
- 2
On-site test of the whole access chain. We test the operator, the access device (keypad, remote, card reader, intercom), and the safety photo-eyes together, because the fault is often in one link but the symptom shows up in another.
- 3
Written price before work starts. Under the Haven Standard, you get the flat price in writing before anyone picks up a tool. That includes the OEM-versus-aftermarket parts decision, spelled out, so you know what’s going in and why.
- 4
The repair. We replace or reprogram the failed component, keeping warranty-safe practices and using the part that fits the system rather than steering you toward a new operator.
- 5
Full retest and photo record. We run the gate through open, close, and reverse, test every access device, and photograph each adjustment and the part number installed. You get that record before we leave.
- 6
365-Day Done Right Promise. If the repair isn’t right within a full year, we make it right at no additional charge.
See the difference
Before
After
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Access Control Costs in Boulder City
Here’s what common Ghost Controls access-control jobs run on a Boulder City gate. Every price is written and agreed before work starts.
| Job | Typical price |
|---|---|
| Keypad replacement (board or unit) | $150 – $280 |
| Remote re-pairing / receiver reset | $95 – $160 |
| Photo-eye realignment or replacement | $120 – $240 |
| Card reader or intercom install | $320 – $650 |
| Smart-access module setup and Wi-Fi reconnect | $140 – $300 |
What moves the price: whether the part is OEM or a quality aftermarket equivalent, whether the gate post or wiring needs attention, and how many access devices you’re running. Estimates are free, and the written price is handed over before any work begins, so there’s no surprise invoice at the end. Call (844) 320-7587 for your exact quote.
Why Boulder City Homeowners Call Vance Gate Repair Boulder City for Ghost Controls Work

What sets us apart isn’t how long we’ve been around. It’s what we can show you: a written price before the job, and a photographed record after it. Our technicians have up to 12 years of experience, and we work on nine major gate-automation brands, so we can service whatever motor is already on your property rather than pushing a replacement. That matters on Ghost Controls systems, where the right part and the right setting make the difference between a fixed gate and a callback. We also handle LiftMaster, Mighty Mule, and DoorKing, so if you have mixed hardware, we’re not stumped. Free second opinion on any written estimate from another company – bring the paperwork and we’ll review it at no cost. A live person answers our phone at any hour.
FAQs
No, a competent repair with the correct parts keeps your Ghost Controls warranty intact. We use warranty-safe practices, record the part number we install, and photograph the work so there’s a documented trail. Call (844) 320-7587 with your system details.
Yes. We source OEM and quality aftermarket parts for Ghost Controls systems, and we’ll tell you in writing which you’re getting and why. If an OEM part is the safer choice for your system, we say so. Call (844) 320-7587 for availability.
Repair is usually the answer when the operator itself is sound and the fault is in the access control (keypad, remote, intercom, wiring). We test the whole system first and give you the written price for repair before recommending anything. Call (844) 320-7587 for an assessment.
Most access-control faults we diagnose and repair in a single visit, and we can often respond same day. Call (844) 320-7587 and a live person will schedule you.
Yes. We set up and troubleshoot phone entry, smart-access modules, card readers, and video intercom on Ghost Controls systems, and we test the app control before we leave. Call (844) 320-7587 to talk through your setup.
Call (844) 320-7587 for a free estimate on your Ghost Controls gate access control in Boulder City. A live person answers any hour, and we’ll put the price in writing before we touch a thing.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.