What Boulder City Homeowners Say About Vance Gate Repair Boulder City
Reviews about gate work are only useful if they tell you what actually happened. Ours tend to mention the price that was written down before anyone touched the gate, the photo record left on the counter, and whether the gate still worked a year later. That’s how we measure a job at Vance Gate Repair Boulder City, and it’s how our customers measure us. Here’s what four of them said after we’d packed up the tools.
Recent Reviews
Our double swing gate stopped opening all the way, and the arm was grinding against the bracket by the end of the week. Vance sent a technician who found the operator arm bent about a quarter inch out of line and the limit switch set past its travel point. He straightened the bracket, reset the limits, and swapped the worn arm bolt with the exact part number written on the invoice. I got a photo log of every setting before he pulled out of the driveway, and the gate has run clean ever since. Free second opinion on the first estimate I’d gotten, too.
Travis K. – Boulder City, near the Historic District
We have a sliding gate with a LiftMaster operator, and it started stopping short about two-thirds of the way open. I’d braced for a full motor replacement quote. Instead, the technician traced it to a misaligned photo-eye – the infrared beam that stops the gate if something crosses the path – knocked out of line by a couple of inches, probably by the wind and grit we get out here. He realigned it, adjusted the swing arm travel, and the written price was under what I expected before he started. The photo record shows exactly where the beam sits now.
Shannon N. – Boulder City, off Nevada Way
My driveway gate is a Ghost Controls unit on a rural lot at the edge of Boulder City, and the desert grit had gotten into the track and the chain guide. Vance took it apart, cleaned the roller track, replaced two worn guide rollers, and re-tensioned the chain to manufacturer spec. What stood out was that the price was written and handed to me before any of that started – no surprise at the end. The gate runs quieter and smoother than it has in three years. The 365-Day Done Right Promise is real: I called six months later about a rattle, and they came back and made it right at no charge.
Arjun R. – Boulder City, near the airport side
We had a gate motor fail on a BFT swing arm on a Saturday evening, and I was sure we’d be waiting until Monday. A live person answered the phone at ten at night, took the details, and a background-checked technician was out the next morning with the part in hand. He replaced the motor, kept the existing bracket since it was still sound rather than pushing a whole new unit, and left us a written record of the part number and a photo of the wiring before he left. Price was agreed in writing before he touched a bolt.
Yolanda V. – Boulder City, near Boulder City Parkway
The actuator on our gate had been making a grinding sound for weeks, and the other company I called just quoted me a full replacement. Vance offered a free second opinion on that written estimate, reviewed the paperwork, and showed me the actuator was still serviceable with a new gear set and a fresh set of limit adjustments. They also fitted a new safety edge strip – the pressure sensor that reverses the gate if it hits an obstruction – because the old one had cracked in the heat. What they found and what they replaced is all in the photo record they left with me.
Travis K. – Boulder City, near Adams Boulevard
We’d been through two other companies who couldn’t get our Linear operator to hold a consistent open position. The Vance technician spent nearly an hour on diagnostics, found the issue was a failing limit switch and a worn drive gear, and gave us a flat price in writing that included both repairs and the labor. No upsell, no “we recommend replacing the whole motor.” A year later, under the Done Right Promise, they came back out when the gate drifted and re-set it without charging me. That’s the reason I’ve recommended them to two neighbors in Boulder City.
Shannon N. – Boulder City, near Hemenway Valley
Our property has a DoorKing gate operator at the entry, and a power surge after a storm knocked out the control board. Vance had the DoorKing board on hand and demonstrated the swap, showed me the wiring diagram they follow – the technician said it’s the same commercial-grade documentation standard they use on access-control sites – and left a photographed record of the new board and every connection. The written price was on the work order before the soldering iron came out. I also appreciated that they didn’t try to talk me into a different brand since it was already installed.
Arjun R. – Boulder City, near Bootleg Canyon Drive
Why Customers Trust Us

Those reviews keep circling the same few things, and none of them are about personality. The written price before the work starts is Haven Standard Clause 1, and it’s why nobody on this page is quoting a number they got surprised by. The photo record of what was found, adjusted and replaced is Clause 4, and it’s on every visit. Nine automation brands serviced means an Arjun or a Yolanda with a BFT or a DoorKing already on the gate doesn’t get steered into buying a new one. And the 365-Day Done Right Promise means a fix that doesn’t hold gets fixed again, no argument, no fee. We’ve completed 22,000+ gates with that standard behind them, and we’re licensed and insured on every job. Call (844) 320-7587 – a live person answers, day or night.
Written by the team at Vance Gate Repair Boulder City.