Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Las Vegas
If you’re putting in a new driveway, sliding or pedestrian gate in Las Vegas, most residential installations run $2,400 to $6,800 for the gate, hardware and operator together, and the written price is in your hands before anyone picks up a tool. We’re Vance Gate Repair, and we connect Las Vegas homeowners with independent local gate professionals who install on tight lots, in HOA communities, and along shared driveways where geometry matters more than the catalog. You’ll know your number in writing up front. Call (844) 320-7587 and a live person answers, any hour.
Why Vance Gate Repair Boulder City Is Las Vegas’s Preferred Gate Installation Company
Las Vegas homeowners research before they call, and what they want is evidence: a written scope, a written price, and a record of what was actually installed. Every job we coordinate runs under The Haven Standard, which means the flat price is handed over before work starts (Clause 1), a photographed record of the install is left with you on every visit (Clause 4), and the 365-Day Done Right Promise covers the finished work for a full year.
Our technicians have up to 12 years of experience, and they carry the documentation habit that came out of commercial access-control work: wiring diagrams, limit-switch readings, the part number installed. That matters in Las Vegas, where a new operator has to survive 105°F summers and monsoon gusts, and where an HOA architectural committee may want to see exactly what went in. We service nine major automation brands, so we work with the motor that fits your property rather than steering you toward a replacement. Bring a written estimate from another company and we’ll give you a free second opinion on it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Las Vegas

Installation work is measured, ordered and scheduled, so there’s no same-day promise here. What you get instead is a free on-site measure and a written price before anything is ordered.
Sliding Gate Installation
On the narrow shared driveways common in Las Vegas’s 1990s and 2000s subdivisions, a sliding gate is often the only geometry that works: the panel travels along the wall instead of sweeping an arc into the parked-car zone or the pedestrian path. We install rack-and-pinion slide gates with the operator tucked to the wall, sized so the panel clears the approach at every point. On cramped lots, that clearance is the whole job.

Driveway Gate Installation
A driveway gate install in Las Vegas usually starts lower than the gate itself. If the hinge post has settled or the original bolts have pulled from a stucco-and-block wall, a pro digs and re-pours a proper footing before hanging new hardware, because hanging a new panel on a failing post fixes it twice. We size the footing to the gate weight and stage the work so your driveway stays usable through the install.

Pedestrian Gate Installation
Walk gates on HOA properties have to latch reliably, clear the walkway, and match the fence line they sit in. In gated communities around 89128 and 89149, that often means a self-closing pedestrian gate with the right color and finish for architectural review. Pedestrian access stays open while the work is staged, which matters when it’s the only way in or out on foot.

Swing Gate Installation
Swing gates belong where the arc genuinely clears the garage approach, the walkway and the street. We measure that arc before we order anything. If it fouls the parked-car zone, a swing gate will fight you every morning, and a slide gate is the honest answer. Where the arc is clear, a swing gate with a LiftMaster or FAAC operator gives reliable daily service.
To see how installation fits with repair, automation and parts, visit our Gate Installation hub.
Before
AfterTrusted Brands We Service in Las Vegas
We work with nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. We don’t claim to stock parts locally, because we don’t. What we do is match the operator to your gate’s weight, travel and exposure, order the correct components, and install them with the wiring diagram and settings documented on paper. Whether your property already runs a FAAC arm or you’re choosing a Mighty Mule for a lighter pedestrian gate, the brand follows the job, not the other way around.
Common Gate Installation Problems We See in Las Vegas Homes

Most of what goes wrong here is predictable, and it’s tied to the city’s building pattern and its weather.
- Reusing a settled or undersized hinge post. On tight shared driveways, a new swing gate hung on the old post sags again within a season of 105°F-plus swing cycles. The footing gets re-poured before the panel goes up.
- Forcing a swing gate into an arc that doesn’t fit. Cramped shared-driveway sites sometimes only accommodate a slide gate. Specifying a swing gate anyway means it fouls the parked-car zone or the walkway every day.
- Untested safety hardware. A gate without working entrapment protection, or with an unproven loop detector, isn’t a finished install. Photo-eyes get tested in front of the homeowner, and loop detectors get verified for free-exit.
- Ignoring UV and wind on exterior components. Intense Las Vegas sun degrades keypads, sensors and operator housings faster than the rating suggests, and rare monsoon gusts knock gates out of alignment. Component choice has to account for both.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Las Vegas, NV
Here’s what installation actually runs in the Las Vegas market, in dollars, before anyone starts:
| Work | Typical Las Vegas range |
|---|---|
| Pedestrian walk gate, hardware only | $650 – $1,400 |
| Swing gate with operator, single leaf | $3,200 – $5,600 |
| Sliding gate with rack-and-pinion operator | $4,100 – $7,800 |
| Double driveway gate, both leaves automated | $6,500 – $11,000 |
| New footing and hinge-post rebuild | $600 – $1,800 |
| Safety photo-eyes and loop detector, installed | $300 – $700 |
What moves the number: gate width and weight, whether the footing must be re-poured, the operator brand and duty rating, and how much of the power run is already in place. That price is quoted and agreed before any work starts, so the invoice matches the quote. Estimates and on-site measures are free.
We Also Serve Cities Near Las Vegas

We also take installation work in Winchester, North Las Vegas, Sunrise Manor and Paradise, and the same written-price and photo-record standard applies across the metro. If your property sits on a boundary line between communities, mention it when you call and we’ll confirm coverage. You can read more about Gate Installation in Las Vegas and how we approach the city’s HOA and shared-driveway work.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Las Vegas

You can almost always get an automatic gate, and on a narrow shared driveway a slide gate is usually the better answer. A swing gate needs an arc that clears the parked-car zone and the walkway; if it doesn’t, the panel fouls something every day and you’ll be adjusting it forever. A rack-and-pinion slide gate travels along the wall instead, which is why it’s the common fit on cramped Las Vegas shared-driveway sites. Call (844) 320-7587 and we’ll measure the geometry before quoting.
In most Las Vegas master-planned communities, yes. Architectural review typically requires the new gate to match the builder’s original style and color, and some associations keep pre-approved vendor lists with turnaround requirements to avoid fines. We factor the review into the written scope, so the gate you order passes the committee the first time. Check your CC&Rs or association packet, then call (844) 320-7587 for a free measure.
Because the panel usually wasn’t the problem. On stucco-and-block walls, the hinge post footing has often settled or the original bolts have pulled, so a repaired or replaced panel sags again within a season. The fix is digging and re-pouring a proper footing sized to the gate, then hanging the hardware on solid ground. Fixing the panel alone fixes it twice. Call (844) 320-7587 for a free estimate on the footing rebuild.
A new automatic gate needs tested entrapment protection: photo-eyes (the infrared beam that stops the gate if something crosses the path) and, where the installation calls for it, edge sensors. It also needs a loop detector verified for free-exit, so the gate opens for a departing car without a remote. We test photo-eyes in front of the homeowner and photograph the settings before leaving. Call (844) 320-7587 and estimates are free.
Yes. Las Vegas summer highs routinely top 105°F, and intense UV degrades keypads, sensors and operator housings faster than a milder climate would, while occasional monsoon gusts knock gates out of alignment. The operator has to be rated for the duty cycle your gate actually sees, with exterior components chosen for sun and wind exposure. We match the operator to the gate and document the settings. Call (844) 320-7587 for a free estimate.
Get Your Gate Installation Priced in Writing
If you’re planning a new gate in Las Vegas, the next step is simple: call (844) 320-7587 and we’ll schedule a free on-site measure. You’ll get a written scope and a written price before anything is ordered, a photographed record when the job is done, and the 365-Day Done Right Promise on the installation. A live person answers any hour, and if you’re holding a written estimate from another company, bring it along for a free second opinion.
Written by the team at Vance Gate Repair Boulder City.
