Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Parts & Welding in Boulder City: What to Know First
DoorKing gate parts and welding in Boulder City are handled by an independent DoorKing service provider, not by the manufacturer. Most swing-gate hinge, post, roller and latch repairs run $185 to $1,400 depending on whether we’re welding a cracked post or replacing hardware on a sagging leaf, and standard hardware jobs are usually scheduled within a few days of the written estimate. You get the price in writing before anyone picks up a tool, a photo record of what we found and what we installed, and a repair that’s covered for a full 365 days under our Done Right Promise.
This page is for owners of a DoorKing swing gate or slide gate, particularly anyone who has been told they need a whole new operator when the problem is a hinge, a sagging post, or a worn roller. Call (844) 320-7587 and a live person picks up, day or night.
How DoorKing Products Fail – and How We Fix Them
- Cracked hinge welds on a swing leaf. DoorKing swing operators (the 6400 and 6500 series especially) push a heavy leaf against the same two hinges thousands of times, and on older installs in Boulder City the weld at the hinge-to-frame joint starts to hairline crack. A cracked weld doesn’t announce itself: the leaf starts swinging a few degrees off, and the operator’s open/close limits drift with it. We grind the old weld out, weld the hinge plate back to sound steel, and re-set the limits with a meter reading – never a guess.
- Post lean from clay soil movement. The gate post is the anchor, and a post that has moved a half-inch at the cap shows up as a leaf that drags the ground or a latch that won’t catch. A lot of the soil around Boulder City shrinks and swells with irrigation and the dry months, and a post set years ago without a concrete collar becomes the culprit. We set a new post or re-collar the existing one to square, then re-hang the leaf.
- Rail and frame rot or impact damage on slide gates. DoorKing slide operators (the 9000 series and similar) run on a track, and a bent or rusted bottom rail throws the whole gate off the rollers. We replace the rail section, true the frame, and re-check track alignment – a warped rail is a roller problem waiting to happen.
- Worn gate rollers and the stripped bracket behind them. A roller that’s flat-spotted or a bracket that’s cracked shows up first as a grinding noise, then as a gate that won’t fully close. On DoorKing slide gates the roller bracket takes the load, and aftermarket rollers of the wrong durometer wear in months. We fit rollers matched to the original load and photograph the new bracket position.
- Latch and lock failures misread as operator faults. When a DoorKing gate won’t latch, the operator magnetic limit switch gets blamed before the latch does. We test the latch, the strike, and the limit switch separately, then fix the one that actually failed – so you’re not paying for an operator repair that wasn’t needed.
One thing DoorKing owners learn the hard way: the operator is usually fine. The hardware around it isn’t. Our technicians have up to 12 years of experience and most of them have seen this specific pattern enough times to check the hinge and the post before they touch the control board.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our DoorKing Gate Parts & Welding Process

- 1
Phone intake. We ask which DoorKing model you have and what the gate is doing – lagging, dragging, not latching, cycling short. A live person takes that call 24/7, so there’s no voicemail loop.
- 2
On-site diagnostics. We test the operator, the hinges, the post, the rollers, the latch, and the safety devices separately, then photograph the readings. Limit-switch positions, hinge play, post plumb – all documented.
- 3
Written parts decision. You get a written estimate before work starts, listing whether we’re using OEM or a quality aftermarket part and why. For DoorKing hardware, OEM is worth the premium on hinges and latch assemblies; a quality aftermarket roller is fine where the load matches. We tell you which is which.
- 4
The repair. Welding, post replacement, roller swap, latch rebuild – done on site, correctly, without touching the manufacturer’s warranty on parts we didn’t install.
- 5
Test and re-set. The gate is cycled and the limits re-set with a meter reading. We take a photo of the new position.
- 6
Documentation and cleanup. You get a photo log of every adjustment and the part number installed, filed in the job record. The 365-Day Done Right Promise covers the work – if it’s not right, we make it right at no charge.
Before
AfterWhat DoorKing Gate Parts & Welding Costs in Boulder City
Prices below reflect a written estimate you get before any work begins. Every job is quoted flat, in writing, so the invoice at the end matches the number you were handed.
| Job | Typical range |
|---|---|
| Hinge replacement or re-weld (swing gate) | $185 – $420 |
| Post replacement or re-collaring | $450 – $1,400 |
| Rail repair or replacement (slide gate) | $250 – $650 |
| Custom welding (frame, bracket, hinge plate) | $150 – $500 |
| Gate rollers and bracket set | $120 – $300 |
| Latch and lock repair or replacement | $140 – $380 |
What moves the price: whether the post needs concrete work, whether the leaf has to come off for a full weld, and whether we’re using OEM DoorKing hardware or a matched aftermarket part. Rust and corrosion on an older gate add time, and time is included in the flat quote, not tacked on later. Call (844) 320-7587 for a free estimate – we’ll write the price before we start.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder City Homeowners Call Vance Gate Repair Boulder City for DoorKing Work

We work on nine major gate-automation brands, DoorKing included, which means we don’t steer you toward a full replacement just to stay in our lane. If your DoorKing operator is fine and the failure is a hinge, we say so. If the operator is the problem, we say that too. Every tech is background-checked and uniformed, and you get their name and photo before they arrive.
We work independently of DoorKing, so we can recommend OEM or aftermarket parts based on what’s actually best for the gate – not on a manufacturer agreement. Whether you have a DoorKing, a LiftMaster, a Mighty Mule, or a Ghost Controls unit, the same approach applies: test what failed, quote the fix in writing, photograph the result, and back it for a year.
And when a gate fails after hours, a live person answers. No callback queue. No automated attendant.
FAQs
Is the DoorKing equipment warranty affected by using an independent service provider? No. Using an independent DoorKing service provider like us doesn’t void the manufacturer’s warranty on your operator or on DoorKing parts we don’t touch. If a warranty-covered part fails, we document the failure and tell you clearly what’s covered and what isn’t. Call (844) 320-7587 for a free estimate.
Can you get DoorKing replacement parts in Boulder City? Yes. We source OEM DoorKing parts and quality aftermarket equivalents depending on the job. OEM is usually the better call on hinge and latch assemblies; aftermarket rollers can be fine where the load matches. We tell you which is which, in writing, before we order.
Should I repair or replace my DoorKing gate? Repair is usually right when the operator is sound and the failure is in the hardware – a hinge, a post, a roller. Replacement makes sense when the frame itself is rusted through or the post can’t be brought back to plumb. During the estimate, we tell you plainly which situation you’re in. Call (844) 320-7587 – estimates are free.
How fast can you get to a DoorKing gate problem in Boulder City? Most standard hardware jobs are scheduled within a few days of the written estimate. Emergency situations where the gate is off its track or stuck open get priority. A live person answers the phone 24 hours a day, so call whenever the problem happens.
Do you work on DoorKing slide gates and swing gates both? Yes – both. From a 6400 series swing operator to a slide gate on a bent rail, we test the operator, the hardware, and the safety devices separately and fix the part that actually failed.
Call for a Free Written Estimate

If your DoorKing gate is dragging, sagging, cracking at the hinge, or just not latching the way it used to, call (844) 320-7587 for a free estimate. We’ll come out, test what failed, tell you plainly what it needs, and hand you a flat written price before anyone touches a tool. Estimates are free, a live person answers at any hour, and every repair is backed by the 365-Day Done Right Promise.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.