Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Installation in Boulder City: What to Know First
We install Ghost Controls gate operators and openers in Boulder City as an independent service provider, and most residential installations are measured, quoted in writing, and scheduled within a week of the site visit. Typical driveway swing and slide jobs land between $1,450 and $3,200 installed, depending on gate weight, run length, and whether a power drop already exists at the post. You get the number in writing before anyone picks up a tool, and a photographed record when the technician leaves.
This page is for homeowners who already own a Ghost Controls unit or have one spec’d for a gate they’re building. It’s for the person who read the manual, watched the install video, and still wants to know what a real Boulder City install looks like when the gate isn’t perfectly plumb and the ground isn’t flat. If that’s you, call us at (844) 320-7587 and we’ll talk through your setup.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls builds a solid DIY-grade line, and the failures we see in Boulder City tend to follow the same patterns. Here’s what actually breaks on these units and what a proper installation does to prevent it.
- Control-box moisture on the TDS series. Boulder City’s summer monsoon bursts and the sharp temperature swings between a 100-degree afternoon and a 70-degree night push condensation into control boxes mounted low or facing west. We see corroded terminal blocks on TDS-series boxes more than anything else. Our fix is a gasketed, shaded re-mount at the correct height with a drip loop in the wire run, which isn’t in the factory instructions but should be.
- Undersized batteries on solar-ready ARM and TSS units. Ghost Controls sells solar-ready units that ship with a battery sized for the average customer, not for a Boulder City gate that cycles eight times a day in direct sun. The symptom is a gate that slows and stalls by late afternoon. We size the battery and panel to actual daily cycles, not the spec sheet average.
- Bracket fatigue on tubular-steel swing gates. The post-mount bracket on an ARM-series arm takes the full weight of a sagging gate, and on a gate that’s drifted out of plumb over a few summers, that bracket cracks at the weld. You’ll hear it before you see it: a metallic pop at the end of travel. We weld-repair or replace the bracket and re-level the gate so the arm isn’t fighting gravity.
- Limit and soft-stop drift. Ghost Controls units rely on electronic limits, and a gate that hits a physical stop every cycle slowly drifts the learned travel position. The gate starts reversing early or slamming late. We reset the limits, set the obstruction sensitivity to the actual gate weight, and photograph the new readings so the next tech doesn’t start from zero.
- Photo-eye misalignment from gate sag. The safety beam on these units is only forgiving to about half an inch. A gate that sags a quarter inch per season throws it out of line within two summers. We mount the eyes on their own rigid posts rather than the moving gate frame, so sag stops being a safety problem.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Installation Process

- 1
Site visit and measurement. We measure the gate, check post plumb, map the power run, and note the grade. This is where we catch the problems that turn a two-hour install into a two-day one.
- 2
Written scope and price. You get the flat number in writing before we order anything: operator model, mounting hardware, wiring, and any gate repair needed to make the install last.
- 3
Parts decision. We use Ghost Controls OEM parts where they’re the right call and quality aftermarket brackets and hardware where the OEM part is the weak link. We tell you which is which and why.
- 4
Installation. Post brackets set, arm or slide track mounted, control box and photo-eyes positioned, wiring run with a drip loop and proper conduit.
- 5
Test and documentation. Every cycle tested under load, obstruction sensitivity set to the actual gate, limits confirmed. You get a photo log and the part numbers installed.
- 6
365-Day Done Right Promise. If anything we installed isn’t right within a year, we make it right at no additional charge.
See the difference
Before
After
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Installation Costs in Boulder City
Prices below are real installed ranges for Boulder City, not national averages. The gate itself isn’t included in these numbers; this is the operator, hardware, and labor.
| Scenario | Typical installed price |
|---|---|
| Single swing gate, ARM-series arm, existing power | $1,450 – $1,900 |
| Double swing gate, dual ARM units, synchronized | $2,600 – $3,200 |
| Sliding gate, TSS-series, track and operator | $2,100 – $2,800 |
| Solar upgrade to existing solar-ready unit | $550 – $850 |
| New power run to gate post (if none exists) | $700 – $1,800 |
What moves the price: gate weight and condition, run distance from the panel, whether the post is plumb, and whether the ground needs a concrete pad. Every estimate is free and written before work starts.
Why Boulder City Homeowners Call Vance Gate Repair Boulder City for Ghost Controls Work

Our technicians have up to 12 years of experience, and they’ve installed and serviced every Ghost Controls line we’ve described here. We’re independently owned and operated, and we document every job the same way: photographs of what we found, what we set, and what we installed, left with you and filed in the record.
We service nine automation brands, so we’re not steering you toward a Ghost Controls replacement if a LiftMaster or Mighty Mule unit already on your property can be repaired. And a live person answers the phone 24 hours a day, not a voicemail loop. If another company gave you a written estimate, bring it to us and we’ll review it at no cost.
FAQs
Is my Ghost Controls warranty affected if someone other than the manufacturer installs it? No. Installing a Ghost Controls unit through an independent installer doesn’t void the manufacturer’s warranty on the operator itself. We install to Ghost Controls spec so the warranty stands, and our own 365-Day Done Right Promise covers our labor separately.
Do you stock Ghost Controls parts, or do I have to wait on shipping? We keep common Ghost Controls parts on hand for installs and carry what we need from our supplier for the rest. Most standard installations don’t hit a shipping delay. Call (844) 320-7587 with your model number and we’ll tell you exactly what’s available.
My old operator died – should I replace it with Ghost Controls or repair it? Depends on the unit. If it’s a Ghost Controls with a failing control board, repair is often the right call. If it’s a different brand that’s fifteen years old, we’ll talk through both options with actual prices before you decide.
How fast can you install a new Ghost Controls gate operator in Boulder City? New installations are measured, quoted, and scheduled, typically within a week to ten days depending on part availability. This isn’t a same-day service – a proper install takes planning. Call for a free measure and written price.
Do you handle the power run and the safety edges? Yes. Running power from the panel to the gate post, mounting the photo-eyes, and setting obstruction sensitivity are all part of a complete installation, priced in the written quote. Call (844) 320-7587 for your free estimate.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.