Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Motor Replacement: The Boulder City Owner’s Guide
We replace Ghost Controls gate motors across Boulder City, and most installed jobs land between $650 and $1,150 depending on the model and whether the operator arm or control board is the failed part. When your motor is dead and you’re without gate automation, we can usually get a technician out the same day. Because your gate stops working long before it tells you why, most owners discover the failure in one of three ways: the gate won’t move when they hit the remote, it moves a few feet and reverses, or it groans and stalls halfway. By the time you’re reading this, the symptom has probably been building for a week or two. We name what we find, price it in writing, and show you the photograph before we touch a tool.
Which Ghost Controls Models This Applies To
Ghost Controls builds single and dual swing-gate operators, and the replacement motor you need depends on which series you have. The label sits inside the control box cover or on the underside of the operator arm housing. Photograph it before you call – the model number and voltage stamp tell us exactly which motor to bring.
The practical gotcha: Ghost Controls arms look interchangeable but the internal gearing and stroke length differ between series, and a motor that physically bolts on won’t necessarily drive the gate through full travel or trip the limit switches at the right angles. Fit the wrong arm and you get a gate that reverses halfway or slams the stop.
On OEM versus aftermarket: genuine Ghost Controls motors match your original controller and limit settings exactly, which makes the swap clean. Quality aftermarket equivalents cost less, but we check the voltage rating and the connector pinout against your control board before recommending one. We carry no stock and no parts on a truck – we identify your model first, then source the correct motor, so what arrives is what fits.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Gate Motor Replacement Is Failing

- The gate won’t move on command. If the control board lights up and the arm doesn’t budge, the motor windings or the arm’s internal gear train has likely failed – not the remote, not the battery.
- It starts, then reverses partway. That’s usually an obstruction signal, but when the path is clear it points to a limit switch out of adjustment or a motor losing torque under load.
- A grinding or clicking sound from the arm. Worn or stripped gears inside the operator. Continued use grinds the housing and can turn a motor swap into a full arm replacement.
- The gate stalls or moves slowly. A motor drawing excess current as bearings or gears wear. In Boulder City heat, we see arm housings that run hot and fail earlier than the manual suggests.
- Shadow or ghost operation. The gate opens on its own – often a failing control board sending bad signals, sometimes a dying motor drawing current it shouldn’t.
See the difference
Before
After
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Ghost Controls motor replacement in Boulder City typically runs $650 to $1,150 installed. The swing is driven by your model – single versus dual arm – and whether the failure is the motor alone or the arm, control board, and limit assembly together. We also account for concrete post mounting versus bracket-mount, and whether existing wiring is usable.
The flat price we hand you before any work starts includes the motor, labor, limit-switch calibration, a full travel test, and a photo record of what we found and set. That written price is the Haven Standard at work – no “call for a quote,” no surprise invoice at the end.
Every motor we install is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right within a full year at no extra charge on the labor.
DIY or Call Us?

You can safely check a few things yourself: the control board for a fault light, the remote batteries, and whether anything is blocking the photo-eye beam. Those cost nothing and rule out simple causes.
Past that, this is low-voltage electrical work tied to a moving gate that can crush or trap. Swapping a motor means matching voltage, rewiring to the control board, and recalibrating limits so the gate stops exactly where it should – miscue it and the gate can crush something. That’s not a job for a homeowner with a multimeter and a Saturday. A documented, warranted motor replacement done correctly the first time is the safer and cheaper path. Call us at (844) 320-7587.
FAQs
A well-installed Ghost Controls motor typically lasts 8 to 12 years, but Boulder City’s heat and dust shorten that – we regularly replace motors around the 6- to 8-year mark where the arm runs in direct afternoon sun. Regular limit checks and clearing grit from the arm extend life. Call (844) 320-7587 for a free estimate if yours is aging.
Sometimes, yes – a failed limit switch or a loose connection can be repaired for far less than a new motor. A worn gear train or burned windings usually means replacement. We diagnose first and tell you which one you’re facing before quoting. Call (844) 320-7587 for a free estimate.
Most single-arm Ghost Controls motor replacements are done in two to three hours, including calibration and the photo record. Dual-arm setups and control-board work take longer, and we confirm the timeline when we give you the written price. Call (844) 320-7587 for a free estimate.
We identify your exact GHOST CONTROLS model, then source the correct OEM or vetted aftermarket motor for it – no stock on a truck, no guessing. You get the part number in writing and photographed on the job record. Call (844) 320-7587 for a free estimate.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.