Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Parts & Welding in Boulder City: What to Know First
We repair Ghost Controls gates and gate hardware in Boulder City, from hinge and post replacement to custom welding, rollers, and latch work. Most parts-and-welding jobs are handled in a single visit once the right parts are on hand, and we tell you before we start whether yours is a same-day fix or a scheduled one. The price is written and handed to you before any work begins – no “call for a quote,” no surprise invoice at the end.
This page is for the Ghost Controls owner in Boulder City who already knows their gate model, has watched the arm stutter or heard the hinge squeal, and wants to know what’s actually wrong and what it costs. Call (844) 320-7587 and a live person picks up, any hour. We’re an independent Ghost Controls service provider and not affiliated with or authorized by Ghost Controls.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls builds a solid DIY-oriented automatic gate system, and the failures we see in Boulder City cluster around the mechanical parts that carry the load: hinges, posts, rails, and the mounting hardware that ties them together. The motor and control board usually aren’t the problem. The gate frame around them is. Here’s what we find most often.
- Sagging hinges on single-swing arms (the TSS1 and similar kits). The arm pushes a gate that’s dropped a quarter inch, and the whole assembly binds. We replace the hinge, then check post plumb before we re-hang – a new hinge on a leaning post just wears out faster. You get the part number and a photo of the reshimmed gap.
- Post rot at the ground line, especially on steel posts sunk in desert soil. Boulder City’s swing between dry summers and winter rain pulls moisture against the post base, and the weld seam is where rust starts. We cut out the bad section and weld a new plate or a full replacement post, then prime and paint the seam so it doesn’t start again next season.
- Cracked or bent gate rails on tube-frame gates. A properly set Ghost Controls arm still puts torque on a light rail, and a gate that’s been bumped or leaned on will crack at the weld. We weld the joint, add a gusset if the span needs it, and re-check travel so the arm isn’t fighting a warped frame.
- Worn rollers and guide wheels on sliding setups. Grit and heat flatten the roller face, the gate drags, and the operator strains. We swap the rollers, clean the track, and photograph the new clearance so the next tech knows what was set.
- Latch and lock misalignment after a post shift. The gate closes but the latch won’t catch, or it catches hard. Usually the post moved, not the latch. We realign the strike, adjust the latch, and confirm the gate latches cleanly under its own weight before we leave.
Two things worth knowing that you won’t find on Ghost Controls’s own site. First, a Ghost Controls arm that “runs but won’t hold position” is almost never the control board – nine times out of ten it’s a limit setting that drifted because the gate frame itself shifted, and welding the frame fixes it without touching the electronics. Second, the OEM hinge and bracket hardware is worth the small premium over generic aftermarket on these kits: the mounting geometry matches the arm’s travel, and a mismatched bracket is what causes the premature binding people blame on the operator.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Parts & Welding Process

- 1
Phone triage. We ask for your model, gate type (swing or slide), and what it’s doing. That tells us whether to expect a hardware fix or a weld before we arrive, and whether we need to schedule the work rather than dispatch same-day.
- 2
On-site diagnosis. We check post plumb, hinge wear, rail condition, roller clearance, and latch alignment, then read the limit positions on the operator so we know what the gate was set up to do.
- 3
Parts decision, in writing. We give you the OEM-versus-aftermarket call on each part, with the price for each option written down before anyone picks up a tool – Clause 1 of the Haven Standard, on every job.
- 4
The repair or weld. Hinge, post, rail, roller, latch, or a custom weld. We measure, weld if needed, prime and paint the seam, and re-check travel against the arm.
- 5
The test. We run the gate through a full open and close cycle, confirm the latch catches, and check the arm isn’t binding on the frame.
- 6
Cleanup and the record. You get a photo log of every adjustment and a written record of the part numbers installed, filed with the job. Under Clause 4 (Evidence on every job), that’s included at no charge.
See the difference
Before
After
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Parts & Welding Costs in Boulder City
Most ghost controls gate parts and welding work in Boulder City lands between about $180 and $650 depending on what’s actually broken. Here’s how the ranges break down for common jobs. These are typical figures, not a quote for your gate; the written price we hand you before work starts is the one that counts.
- Hinge replacement (per hinge, swing gate): $180 to $340, more if the post needs shimming or replumbing.
- Post replacement or repair: $320 to $650, driven by post type, depth, and whether a weld plate is cut in.
- Rail repair or custom weld: $150 to $420, depending on whether a gusset is needed and the paint finish.
- Gate rollers (sliding): $140 to $300 for a set, including track cleanup.
- Latch and lock alignment: $120 to $240, usually bundled with a hinge or post fix.
What moves the price: post condition (rot at the ground line is more work than a surface weld), paint finish on a custom weld, and whether the gate has to come off its hinges to do the job right. Estimates are free, and the price is written and agreed before any work starts.
Why Boulder City Homeowners Call Vance Gate Repair Boulder City for Ghost Controls Work

Every job carries the 365-Day Done Right Promise: if a repair isn’t right, we make it right at no additional charge within that year. That’s not a sales line, it’s the company’s standing offer. We’re independently owned and operated, and our technicians have up to 12 years of experience with the mechanical side of gate work – hinges, posts, rails, welds, and the operator settings that depend on them.
We service nine gate-automation brands, so if your gate turns out to need a LiftMaster, Mighty Mule, or DoorKing part we don’t have to steer you toward a replacement to move the job along – we work on whatever motor is already on the property. A live person answers the phone 24/7, and you get the technician’s name and photo before they arrive. Bring us a written estimate from another company and we’ll review it free as a second opinion.
FAQs
Will welding my Ghost Controls gate void the warranty on the motor? No – modifying the gate frame doesn’t touch the operator. Ghost Controls’s warranty covers the motor and control board, and welding the frame around it doesn’t affect that coverage. We’re an independent service provider, so we don’t handle warranty claims ourselves; we keep the motor and board untouched and document what we welded and where.
Can you get OEM Ghost Controls parts in Boulder City, or do you use aftermarket? We use both, and we tell you which on each part before we install it. OEM hinge and bracket hardware is worth the small premium because the mounting geometry matches the arm’s travel; aftermarket rollers and latches are usually fine and cost less. The written estimate shows the option you chose. Call (844) 320-7587 for an exact quote – estimates are free.
My Ghost Controls gate runs but won’t hold position. Is that the motor or the frame? Almost always the frame. A gate that drifts or stalls usually has a hinge or post that shifted, so the arm’s limit setting no longer matches travel. We check post plumb and hinge wear first, weld or replace what’s moved, then reset limits – usually no electronic part needed.
How fast can you get to a Ghost Controls parts or welding job in Boulder City? Same-day is realistic for hinge, roller, latch, and hardware fixes when we have the part on hand. Welding and post replacement are scheduled jobs – we measure, order, and book a slot – and on those we promise a free measure and a written price rather than a dispatch time. Call (844) 320-7587 and a live person will tell you which you’re looking at.
Should I repair my Ghost Controls gate or replace it? Repair, in most cases. Ghost Controls operators are serviceable, and the failures we see are in the gate frame and hardware, not the system. A hinge, post, rail, or roller fix runs a fraction of a replacement and keeps the operator you already own working. If the frame is beyond welding, we’ll show you the photos and say so plainly.
Call (844) 320-7587 for a free estimate on your Ghost Controls gate parts or welding job in Boulder City – a live person answers any hour, and the price is in writing before we start.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.