Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Keypad & Intercom Repair: The Boulder City Owner’s Guide
We repair and replace Mighty Mule keypads and intercoms on residential driveway gates in Boulder City, and most keypad swaps run $185 to $340 installed, with intercom and video-entry work landing higher depending on the unit. If your gate stopped answering the keypad this week, call (844) 320-7587 and we’ll get a live person on the line, day or night.
Owners usually find out the hard way. The gate worked fine yesterday, then the code that opened it for years does nothing, or the keypad lights stay dark, or a visitor buzzes the intercom and gets static instead of your voice. In Boulder City we see plenty of this after a summer of 105-degree afternoons and monsoon dust working into the keypad housing. Sometimes it’s the keypad. Sometimes it’s the wiring between the keypad and the control board, or the board itself. Part of what you’re paying us for is finding out which before we quote a replacement.
Which Mighty Mule Models This Applies To
Mighty Mule sells keypads and intercoms as accessories that work across its residential swing-gate and slide-gate operators, not as model-specific parts. The wired keypad lines (FM137, FM138 and their variants) are built for the low-voltage accessory terminals on the control board, and the wireless keypads talk to a receiver that plugs into the same terminals. So the question isn’t usually “which Mighty Mule opener do I have” – it’s “which keypad, and how is it wired.” That’s the gotcha that trips people up.
To identify what’s on your gate, look for the label inside the keypad housing or on the back plate. Note the part number, whether the unit is wired or wireless, and how many wires run back to the operator. If the label is sun-bleached and unreadable, which is common on west-facing posts around Boulder City, we can identify the unit from the terminal layout and the wire count. On the OEM-versus-aftermarket question: a Mighty Mule-branded keypad keeps the wiring simple and the mounting footprint the same, while a quality aftermarket keypad can cost less but may need a different mounting plate and a receiver wired in. We’ll show you both, in writing, before you decide.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Mighty Mule Keypad & Intercom Repair Is Failing

- The keypad lights are dead. Usually a failed transformer, a tripped breaker on the accessory circuit, or corroded wire connections at the operator. We meter the low-voltage side first because it’s the cheapest thing to rule out.
- The code works sometimes and not others. Often a worn keypad membrane or a failing receiver. In Boulder City, heat cycling through summer is hard on the membrane contact pads.
- One code works, another doesn’t. Almost always a programming issue, not a hardware failure. We reprogram and photograph the new code list before we leave.
- The intercom buzzes but no voice comes through. Typically a failed speaker, a bad microphone, or a broken wire in the run between the pedestal and the house. We trace the run and test at both ends.
- The gate opens from the keypad but the intercom is silent. Points to a shared power or ground problem on the accessory circuit, or a separate intercom power supply that has failed.
See the difference
Before
After
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Boulder City, a wired Mighty Mule keypad replacement typically runs $185 to $260 installed, and a wireless keypad with a new receiver runs $220 to $340. Intercom and video-entry repairs generally land between $260 and $480 depending on whether we’re replacing a handset, a speaker, or the full door station. The range comes down to three things: which unit you have, whether the existing wiring is reusable, and how far the run is from the keypad to the operator.
| Item | Typical installed range |
|---|---|
| Wired keypad replacement | $185 – $260 |
| Wireless keypad + receiver | $220 – $340 |
| Intercom / video-entry repair | $260 – $480 |
| Wiring or power-supply fault repair | $150 – $320 |
That price is written and handed to you before any work starts. You’ll get a photo record of what we found, what we set, and what we installed. And under our 365-Day Done Right Promise, if the repair isn’t right within a year, we make it right at no extra charge.
DIY or Call Us?

There’s a safe middle ground here. You can check the breaker on the accessory circuit, confirm the wires are tight at the operator terminals, and try a fresh code programming sequence from the manual. Those cost nothing and solve a surprising number of calls.
Where it goes wrong is at the power supply and the control board. The keypad runs on low voltage, but the operator runs on 120-volt line power, and opening that cabinet to chase a wire is where a homeowner gets hurt or fries a $200 board. If the keypad is dead and the breaker is fine, that’s the point to stop. Call us at (844) 320-7587 and we’ll send a technician who knows these boards.
FAQs
Five to eight years is typical for a keypad on a west- or south-facing post here. The sun and the summer heat do more damage to the membrane and the housing than the electrical components, which is why shade and a simple cover add years to the unit.
Sometimes, yes. A code that won’t program, a corroded terminal, or a loose wire are repair jobs, and we’ll tell you honestly if repair is the better call. A failed membrane or a dead speaker usually means replacement, but we’ll show you the test results before you commit.
A straight keypad swap on existing wiring runs about 45 minutes to an hour. Wireless keypads with a new receiver are similar. Intercom work can run two to three hours if we need to trace a wire run or replace a power supply.
We identify your existing unit by part number and terminal layout, then source the correct OEM or compatible part and confirm it matches before we install. You’ll get the part number in writing on your invoice so a future technician – or you – knows exactly what’s on the gate.
We’re an independent service provider and not affiliated with Mighty Mule. We also work on LiftMaster, Ghost Controls, DoorKing and other major gate brands, so whatever motor is already on your property, we can work on it.
If your keypad or intercom stopped working, call (844) 320-7587 for a free estimate. We’ll give you the price in writing before the job starts, and a live person answers at any hour.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.