A Vance company - serving Boulder City, NV

Driveway Gate in Boulder City, NV

Sliding driveway gatesSliding driveway gates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Driveway Gate in Boulder City, NV

A driveway gate in Boulder City, NV is a swing or sliding gate that closes off your vehicle entrance, and it’s usually automated with a motor, a keypad, a remote, or a loop detector. Most calls we get here are about gates that stopped opening, drifted past their travel limit, or got clipped by a vehicle backing out of a tight Historic District driveway. Vance Gate Repair Boulder City handles the whole thing: repair, adjustment, automation, and parts, all under a written price before anyone touches the gate. Call (844) 320-7587 and a live person picks up, day or night.

Driveway gates are their own discipline. A pedestrian gate is a hinge and a latch. A driveway gate carries weight, wind load, a motor, safety sensors, and a control board that has to talk to all of it. Because Boulder City sits at the edge of the Mojave with hard summer heat and dust that works into every moving part, we see wear patterns here that a coastal installer would never think to check. We photograph what we find, write down the limit-switch readings and wiring before we change anything, and leave that record with you. That habit comes out of commercial access-control work, where a gate that fails without documentation costs somebody real money.

If you’re weighing a fresh install against repair, start with our Gate Installation page, which covers site layout and motor selection in more detail than we can fit here. If your gate already exists and misbehaves, this page is the one you want. You can also see how we handle the broader category on our home page.

When You Need Driveway Gate Work

Most homeowners don’t call us because they want a new gate. They call because something changed and they can’t name it. Here’s what that looks like around Boulder City.

  • The gate opens halfway and stops. Almost always a limit switch out of adjustment or a control board that’s lost its learned travel. On sun-exposed operators along the ridges, heat can shift the geometry just enough to trip the safety reverse. We read the switch position, photograph it, and reset it to spec.
  • The motor hums but nothing moves. Usually a stripped drive gear or a worn chain on a sliding gate, or a failed capacitor on a swing operator. We’ve seen this most on gates near the dry washes, where fine sand gets into the track and grinds the rollers down.
  • Something hit the gate. Backing out of a narrow drive in the older blocks of town is the single most common cause of bent gate frames we see. We assess whether the frame can be straightened and re-welded or needs to be replaced, and we tell you which before you commit.
  • The keypad or remote stopped working. With DoorKing and LiftMaster systems, this is often a receiver issue, a dead battery in the remote, or a wiring fault at the low-voltage connection. We trace it from the keypad back to the board rather than replacing parts until something works.
  • The gate is slow, noisy, or scraping. Roller and hinge wear accelerate fast in desert grit. A gate that squealed last spring is now dragging on its track. This one’s worth catching early because a worn roller can bend a track section within a season.
  • You bought a house with a gate nobody documented. We see this constantly. The previous owner left no manual, no wiring diagram, no idea which brand is on the operator. We identify the brand (often Elite or Mighty Mule on older residential installs here) and build the record from scratch.

Our Driveway Gate Process

professional gate repair service
Our Driveway Gate Process

Every job follows the same order. We don’t skip steps because the fix looks obvious from the street.

  1. Phone intake with a live person. You describe what the gate is doing, we ask a few questions about the brand and age if you know them, and we set a time. No voicemail, no callback queue, any hour.
  2. On-site diagnosis before any price. We inspect the operator, the arm or chain, the track, the hinges, the safety photo-eyes (the infrared beams that stop the gate if a person or car crosses the path), and the control board. We test travel in both directions and record the limit-switch positions.
  3. Written scope and price, handed over. Before any tool comes out of the truck, you get a written document that names the fault, names the parts, and names the flat price. This is Clause 1 of The Haven Standard, and it’s non-negotiable on our end.
  4. The repair, done to manufacturer spec. We work on the motor that’s already on your property rather than steering you toward a replacement. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever’s bolted to your post, we can work on it.
  5. Full cycle test with safety check. We run the gate through open, close, and obstruction-reverse cycles. If the photo-eye or the safety edge doesn’t stop the gate properly, the job isn’t finished.
  6. Documentation and handoff. You get a photo log of every adjustment, the part numbers installed, and the final limit-switch settings. It’s filed in the job record too, so a future technician never has to rediscover the same fault. Under Clause 4 (Evidence on every job), this record is included at no extra charge.

That last step is where most companies stop short. We’ve walked onto jobs where a previous repair worked but left no record, and the next call cost the homeowner twice what it should have. Written price, photographed work, and a year to make it right: that’s the whole idea.

BeforeBefore
AfterAfter

Driveway Gate Pricing in Boulder City

Here’s what driveway gate work typically runs in this market. These are real ranges, not teaser numbers. Every job gets a written flat price after diagnosis, and what you’re quoted is what you pay.

Service Typical Range What Affects It
Diagnostic visit (credited to repair) $75 – $125 Gate type, access, whether wiring must be traced
Limit-switch adjustment or reset $140 – $220 Operator brand, board accessibility
Photo-eye realignment or replacement $160 – $280 Wiring condition, post mounting
Swing-arm motor replacement $600 – $1,150 Brand, arm bracket condition, whether the post needs work
Sliding-gate roller and track service $250 – $550 Number of rollers, track section replacement
Keypad or receiver replacement $220 – $420 Brand (DoorKing and LiftMaster parts differ in price), wiring runs
Gate frame straightening and re-weld $300 – $700 Extent of bend, material gauge, finish repair
New automated driveway gate install $2,800 – $6,500+ Width, material, motor model, grading and concrete

Two things push these numbers around in Boulder City specifically. First, the heat: operators mounted in direct afternoon sun on an east-facing post fail faster and sometimes need a motor rated for higher duty cycles, which costs more. Second, soil and grading. Lots that slope toward the street often need a low-profile operator or a different arm geometry, and that changes the install price more than the gate material does. We also offer a free second opinion on any written estimate you’ve received from another company. Bring the paperwork and we’ll review it at no cost before you sign.

Everything we complete carries the 365-Day Done Right Promise. If the repair isn’t right within a full year, we make it right at no additional charge. No argument, no fee.

FAQs – Driveway Gate

Technician applying sealant to a weathered metal gate post cap repair
FAQs – Driveway Gate

How much does driveway gate repair cost in Boulder City?

Most driveway gate repairs in Boulder City run between $140 and $550, depending on whether it’s an adjustment, a safety-sensor fix, or a motor and roller replacement. Motor replacements push higher, typically $600 to $1,150. You get a written flat price after diagnosis but before any work begins. Call (844) 320-7587 for a free estimate.

Can you come out the same day?

Often, yes. We take calls around the clock and dispatch same-day when the schedule allows, and a live person answers whenever you call, including nights and weekends. A gate stuck open is a security problem, so we treat it with priority. Call (844) 320-7587 and we’ll tell you the soonest window.

Is it cheaper to repair my driveway gate or replace it?

Repair is cheaper in most cases, and it’s what we recommend unless the frame is structurally compromised or the operator is obsolete and unsupported. A swing-arm motor replacement at $600 to $1,150 is a fraction of a new automated install, which starts around $2,800. We’ll tell you plainly which makes sense after we’ve looked at it. Call (844) 320-7587 for a written assessment.

Which gate brands do you work on?

We service nine major automation brands, including DoorKing, LiftMaster, Elite, and Mighty Mule, plus FAAC, BFT, Linear, Viking, and Ghost Controls. That means we can usually work with the motor already on your property instead of pushing a replacement. If you’re not sure what you have, we identify it on the diagnostic visit and document it for your records. Call (844) 320-7587 to schedule.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Talk to a Person Who Can Name the Price

If your driveway gate in Boulder City is sticking, reversing, or just overdue for service, the next step is a phone call. Tell us what it’s doing, and we’ll set a time and bring the written price with us. A live person answers at (844) 320-7587 around the clock, and estimates are free. Our technicians have up to 12 years of experience, and every visit ends with a photo record in your hands and a one-year promise behind the work.

Written by the team at Vance Gate Repair Boulder City, serving Boulder City.

Need Gate Repair help in Boulder City? Licensed & insured · within the hour response · free estimates
Call (844) 320-7587
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Vance Gate Repair Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch