Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Enterprise
If you’re planning a new driveway gate or finally automating the manual gate your builder left you, we install gates across Enterprise, NV, and we quote the whole job in writing before a single post is set. Enterprise is a different kind of install market than the rest of the valley: most of it is master-planned, HOA-governed, and built between the 1990s and 2010s, which shapes everything from the powder-coat color you’re allowed to use to whether a conduit run was ever put in the ground. Our technicians have up to 12 years of experience and know the 89139 neighborhoods well. Call (844) 320-7587 for a free estimate.
Why Vance Gate Repair Boulder City Is Enterprise’s Preferred Gate Installation Company
We built our reputation in Enterprise on paperwork as much as on welding. Every installation starts with a written scope and a flat price handed over before work begins, which is Haven Standard Clause 1, and it ends with a photographed record of what we found, what we set, and what we mounted. Enterprise homeowners research before they call, and we’d rather you see the number in writing than hear it over the phone.
That documentation habit came out of commercial access-control work, and it’s why we keep wiring diagrams and limit-switch readings on every job. It matters here more than most places: when a gate has to pass HOA architectural review, the record of the approved color and iron pattern is part of the installation, not an afterthought. Every completed job is covered by our 365-Day Done Right Promise: if something isn’t right, we make it right at no additional charge within that year. A live person answers the phone at any hour, so you’re never routed to a voicemail loop.
We’re an independently owned and operated gate specialist. We don’t publish a review count we can’t stand behind, but Enterprise customers tend to come to us after reading the three-star reviews elsewhere and wanting the price visible up front. We also offer a free second opinion on any written estimate from another company. Bring the paperwork and we’ll review it at no cost.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Enterprise

Driveway Gate Installation
Most driveway gate work in Enterprise starts with a builder-grade gate that’s reached the end of its hardware life. A typical driveway gate installation in Enterprise runs $3,200 – $7,800 depending on width, material, and whether we have to reset the hinge post footing to carry an operator. We match the finish to your community’s approved color before anything is mounted.

Sliding Gate Installation
Slide gates make sense on tighter Enterprise lots where a swing won’t clear the driveway apron, but they demand a level track and rack-and-pinion that survives desert grit. A typical sliding gate install in Enterprise runs $4,500 – $9,500 with automation. We set the track to account for the seasonal dust that works into rollers and causes sticking a few years in.

Swing Gate Installation
Single and double swing gates are the default in Enterprise’s tract communities, and the hinge post is where most of them fail. We size the footing for the operator from the start, so automation doesn’t accelerate sag on a post that was never built for it. Swing gate installation in Enterprise typically runs $2,800 – $6,500 for a manual gate, more with an operator.

Pedestrian and Courtyard Gates
Courtyard and pedestrian gates are common in the stucco-walled homes around Enterprise, often in decorative wrought iron or vinyl. These run $900 – $2,600 installed. If you want an operator on one, we’ll talk through power options, including solar, since buried conduit is rarely there on a courtyard gate.
Before
AfterTrusted Brands We Service in Enterprise
We work on nine major gate-automation brands, and on Enterprise installations we see a lot of LiftMaster and DoorKing operators, plus Mighty Mule on the DIY-leaning properties. We don’t claim to stock parts on a truck, and we won’t steer you toward a replacement when a repair will do. If your existing motor can be made to work, we’ll tell you and show you the readings that say so. When a part has to be ordered, we give you the lead time in writing and schedule around it rather than promising a same-day fix on a measured job.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Enterprise Homes

- Builder-grade hardware automated without reinforcing the post. The gate arrives manual and gets an operator years later, and the hinge post was never sized for the load. Without a reset footing, the new automation speeds up sag instead of fixing it.
- No buried conduit run. Retrofitting an operator onto a manual gate usually means no power run exists, so surface wiring gets used and the HOA architectural review flags it. We pull a proper conduit run for 120V or low-voltage power instead.
- Off-the-shelf color and iron pattern. A powder-coat color or iron pattern picked off a swatch often misses the CC&R match, and the install stalls at approval. We source the specific finish your community requires before we build.
- Desert grit in rack and pinion. Dust and sand work into rollers and the rack on slide gates, causing the sticking and misalignment the original install never accounted for. It’s the most common call we get on Enterprise slide gates.
Pricing for Gate Installation in Enterprise, NV
Here’s the range for Enterprise, and it’s the range you’ll see in your written quote:
- Pedestrian or courtyard gate: $900 – $2,600
- Manual swing driveway gate: $2,800 – $6,500
- Automated swing gate (single or double): $4,200 – $9,800
- Sliding gate with automation: $4,500 – $9,500
- Conduit run and power (if not already in place): $600 – $1,800
- Hinge post reset or replacement: $450 – $1,400
What moves the number: gate width and material, whether the existing footing can carry an operator, whether a conduit run has to be added, and the finish required by your HOA. The price is written and agreed before any work starts, so there’s no invoice bigger than the quote at the end. Estimates are free.
We Also Serve Cities Near Enterprise

We install and service gates in the communities around Enterprise too, including Spring Valley, Paradise, Winchester, and Henderson. Enterprise sits close to all of them, and we handle the local approval quirks in each. If you’re nearby, see our Enterprise page or call to confirm coverage.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Enterprise

Yes, and it’s the most common installation we do in Enterprise. But the hinge post usually wasn’t sized for an operator, so the job includes reinforcing or resetting the footing and pulling a conduit run for power. Skip those two steps and the automation wears the gate out faster than the manual hardware did. Call (844) 320-7587 for a written scope and price.
In most Enterprise master-planned communities, yes, and it comes before the permit in practice. The powder-coat color and iron pattern have to match the CC&Rs, and we source the approved finish before we build so the install doesn’t stall at architectural review. That’s a step the unincorporated pockets around the valley don’t have. Our Gate Installation team can tell you what your community requires.
A new automatic gate needs entrapment protection, meaning a photo-eye (the infrared beam that stops or reverses the gate if something crosses the path) and, on many installs, a loop detector or edge sensor. We set and photograph the readings so the safety devices are documented, not just wired. Call (844) 320-7587 and we’ll spec what your gate needs.
Desert grit in the rack and pinion and rollers is almost always the cause. Enterprise’s seasonal dust works into the track, and a gate installed without allowance for it starts to bind and misalign. We set the track and rollers for the conditions here, and if yours is already sticking, a free estimate will tell you whether it needs adjustment or a rebuild. Call (844) 320-7587.
Often yes, especially where no buried conduit exists and running power is expensive or awkward. Solar is practical for a lighter pedestrian or courtyard gate with a modest operator draw, and it avoids the surface-wiring problem that stalls HOA review. We’ll tell you honestly if your site won’t support it. Estimates are free at (844) 320-7587.
Ready to get a written price for your Enterprise gate? Call (844) 320-7587 for a free estimate. Every installation comes with a written scope, a photographed record, and our 365-Day Done Right Promise.
Written by the team at Vance Gate Repair Boulder City.