Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If your gate is sagging, seized, or stuck because the solar operator won’t hold a charge, we can help. Vance Gate Repair Boulder City handles gate parts and welding for Boulder City homeowners working with long driveways, wide farm gates, and the older iron pedestrian gates that define the historic core. We know this town runs on more solar-powered operators and custom ironwork than the rest of the valley combined, and that most problems here need on-site fitting, not a boxed replacement. Call (844) 320-7587 and a live person answers, any hour.
Why Vance Gate Repair Boulder City Is Boulder City’s Preferred Gate Parts & Welding Company
Boulder City homeowners research before they call, and they want the price on the page and the paperwork in hand. That’s the whole reason we work under The Haven Standard: a written scope and a written price before any tool comes out, plus a photographed record of what we found, what we set, and what we installed on every visit. Clause 1 means you know the number before work starts. Clause 4 means you keep the evidence when we leave.
We service nine major automation brands, from Mighty Mule to LiftMaster and FAAC, so we can work on the operator already on your property instead of steering you toward a new one. Every technician is background-checked, uniformed, and named and photographed before arrival, and our technicians bring up to 12 years of experience to the job. We’ve handled more than 22,000 gates since 2014, each one priced in writing first. If a written estimate from another company is sitting on your counter, bring it by for a free second opinion. We’ll review the paperwork at no cost.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City

Here in the mouth of the Eldorado Valley, gate work is mostly custom, because the gates themselves are custom. Original ironwork and hand-built ranch panels don’t take drop-in parts, so we fit and weld on site.
Post Replacement in Boulder City
When a wide acreage gate sags, the hinge post footing has usually loosened, sometimes after a spring windstorm off the McCullough Range. We pull the old post, re-set the footing, and true the gate so the panel swings without binding. A typical post replacement in Boulder City runs $350 to $750, depending on post size, depth, and whether the gate needs sag correction afterward.

Custom Welding in Boulder City
Wide farm gates on long driveways warp and bind in their tracks, and vintage ironwork often needs a hand-fabricated strap or bracket that no catalog carries. Our welding is done on site with the gate in place where we can reach it. A typical custom weld repair in Boulder City runs $150 to $400, priced per repair and written up before we start the torch.

Hinge Replacement in Boulder City
In the historic district around Nevada Way and Avenue B, the original 1930s iron pedestrian gates have hand-forged strap hinges that seize from sun-baked grease and desert grit. We keep a stock of vintage-style hinges and use dry graphite rather than oil, which turns to gum in the 110°F summers. Hinge replacement on a pedestrian gate usually runs $125 to $300 per gate, including fitting to the existing post.

Rail Repair in Boulder City
Wood rail on the older bungalows near the historic core bakes and warps, and a bent metal rail throws the whole panel out of square. We repair or replace the rail section and re-align the frame so the gate tracks true. Rail repair typically runs $100 to $250, depending on the material and how much of the frame needs re-squaring. For the full range of what we repair, see Gate Parts & Welding.
Before
AfterTrusted Brands We Service in Boulder City
We work on whatever motor is already on your gate, from Mighty Mule solar operators to LiftMaster and FAAC on the heavier ranch panels. We don’t claim to stock brand parts locally, because we’d rather get you the right part than a close one. Tell us the brand and model, and we’ll source the part and schedule the fit. Call ahead to confirm the part for a specific model so there’s no waiting. On heavy acreage gates, a BFT or FAAC operator sized for the panel’s weight and daily cycles holds up better than a light unit that’s asked to do too much.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Boulder City Homes

- Solar operator batteries failing early. Desert temperature swings and dust on the panel cut charging efficiency, so the battery no longer holds enough power to move a heavy gate. You’ll find the gate stuck open or shut on the coldest or hottest days of the year.
- Wide farm gates warping and binding. Long driveways and wide panels take the full brunt of a monsoon microburst, and a gate that’s knocked out of its track makes the operator overheat or strip gears trying to force it.
- Seized hand-forged hinges on 1930s iron gates. The historic core still runs original wrought-iron pedestrian gates, and their strap hinges freeze up from sun-baked grease and grit. They need dry graphite and often a new hinge.
- Sagging panels from loosened post footings. Boulder City wind works the footing of a hinge post loose over time, and once the post leans, the whole gate drops out of line and starts dragging.
This is why gate repair in Boulder City is as much about matching the historic streetscape as fixing hardware. Federal-planned layout and historic district rules require consistent fence setbacks and forbid visible front-yard solid walls, so a repair that doesn’t match the 1930s look won’t pass review. On acreage lots, mains power is often impractical, so the operator runs on solar, and after a windstorm the gate sags when the hinge post footing loosens and the battery can’t drive the heavy panel. That’s the job: re-set the footing, correct the sag, and size a heavy-duty solar operator to the gate’s weight and daily cycles. That combination of streetscape rules, wind, and solar is specific to Boulder City and shapes nearly every job here.
Pricing for Gate Parts & Welding in Boulder City, NV
We price in writing before work starts, so the number you see is the number you pay. A typical gate welding job in Boulder City runs $150 to $400, post replacement $350 to $750, hinge replacement $125 to $300 per gate, and rail repair $100 to $250. Heavy-duty solar operator upgrades for acreage gates run higher because the unit and mounting have to be sized to the panel. What moves the range is footing depth, gate width and weight, and whether the existing hardware can be refit or has to be fabricated. Under Clause 1 of The Haven Standard, you get the written price before we start, and there’s no surprise invoice at the end. Every repair is also covered by our 365-Day Done Right Promise: if it isn’t right, we make it right at no charge. Estimates are free.
We Also Serve Cities Near Boulder City

Boulder City’s acreage entrances and historic ironwork are what we know best, but we also take gate parts and welding work in Henderson, Whitney, Paradise, and Enterprise. If you’re just outside town, mention it when you call and we’ll confirm coverage. More on our Gate Parts & Welding in Boulder City service.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City

You run it on a solar-powered operator sized for the gate’s weight and daily cycles, which is the standard setup on acreage lots around Boulder City. The panel, charge controller, and battery have to be matched to the load; an undersized kit is why so many solar gates quit holding a charge. We’ll size the system to your gate and quote it in writing before anything is ordered. Call (844) 320-7587 for a free estimate.
They can often be freed and kept, but seized hand-forged strap hinges usually need replacement or re-pinning to work reliably again. In the historic core we free them with dry graphite, never oil, because oil gums up in the summer heat, and we keep vintage-style hinges that match the 1930s look. We’ll tell you on site which route holds up. Call (844) 320-7587 for a written quote.
A loosened hinge post footing is the usual cause, and the wind off the McCullough Range is what works it loose. Once the post leans, the panel drops out of line, drags, and strains the operator. We re-set the footing and true the gate so it swings freely again. Call (844) 320-7587 to schedule an inspection.
Yes, automatic gates need entrapment protection – photo-eyes (the infrared beam that stops the gate if something crosses the path) and usually a sensing edge on the leading edge of the panel. You can check yours by breaking the beam while the gate is closing and confirming it reverses. If it doesn’t reverse, stop using the operator and call us at (844) 320-7587.
Yes, custom welding is routine here because the original ironwork rarely matches anything off a shelf. We fabricate the bracket, strap, or rail section on site and fit it to the existing gate, then photograph the installed part for your record. Most custom welds run $150 to $400. Call (844) 320-7587 for a free estimate.
Whether it’s a sagging acreage gate, a solar operator that won’t hold a charge, or a 1930s iron hinge that’s frozen shut, we’ll put the price in writing before we touch it. Boulder City gate owners can call (844) 320-7587 for a free estimate, and a live person answers at any hour.
Written by the team at Vance Gate Repair.