A Vance company - serving Boulder City, NV
Vance Gate Repair Boulder City gate repair team

Gate Parts & Welding Near Me in Boulder City - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gate Parts & Welding Near You in Boulder City, NV

If you’re searching for gate parts and welding near you in Boulder City, NV, we can help. Vance Gate Repair supplies replacement gate hardware and handles on-site welding for driveway and entry gates across Boulder City and the surrounding valley, with a written price handed over before any work starts. Call (844) 320-7587 and a live person answers, any hour of the day or night.

We work on the gate that’s already on your property. That means we match parts to what’s actually bolted to your posts rather than steering you toward a full replacement, and when a hinge, latch, or bracket needs welding, we bring the equipment to your driveway. Our technicians have up to 12 years of experience, and every visit follows The Haven Standard: a written scope, a written price, and photographs of everything we found and installed.

Key Takeaways

  • Replacement gate hardware and on-site welding are handled on the same visit in most cases.
  • The flat price is written and handed to you before a tool comes out of the truck.
  • You get a photo log of every part installed and every weld completed, filed with your job record.
  • Every repair carries the 365-Day Done Right Promise.
  • A live person answers the phone at 2 a.m. as readily as at noon.

Fast, Local Gate Parts & Welding

Most gate parts and welding calls in Boulder City get a same-day or next-day visit, because the parts that fail most often (hinge pins, rollers, latch receivers, and weld joints at the post plate) are common enough that we can source them quickly. When a job needs a specific bracket or a manufacturer-specific piece, we tell you the lead time in writing before you commit to anything.

Boulder City’s climate does its own number on gate hardware. The dry desert air is kind to some metals and brutal on others, and the occasional monsoon burst drives water into weld joints and hinge barrels that don’t drain well. We see galvanized steel gates holding up fine for years while painted mild-steel hardware rusts from the inside at the weld seam. Knowing which is which saves you from paying twice. If a hinge looks solid but the weld at its base is failing, we photograph the crack so you can see exactly what we’re seeing.

Welding on a residential gate is not the place for a borrowed hobby welder and a free afternoon. Gate frames carry the full weight of the leaf plus the force of the motor, and a weld that looks fine but lacks penetration will crack under load within a season. That’s the kind of thing we check and document, not guess at. We serve Boulder City and the wider Las Vegas Valley, and we keep the same written-price standard on every visit.

What Gate Parts & Welding Work Covers

professional gate repair service
What Gate Parts & Welding Work Covers

Here’s what actually shows up on a typical gate parts and welding job in Boulder City:

  • Hinge and pivot repair or replacement – including weld-on hinges, adjustable pivot hinges, and post-plate reinforcement when the original weld has fatigued.
  • Latch and receiver hardware – gravity latches, magnetic latches, electric strikes, and the weld repairs that keep them aligned.
  • Roller and track hardware – for sliding gates, including roller brackets and end stops.
  • Weld repair at stress points – post plates, frame corners, and motor-arm brackets, where repeated cycling cracks the original weld.
  • Replacement parts sourcing – matched to the brand of automation on the gate, whether that’s LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule.

One caution worth saying plainly: if your gate uses high-tension springs or cables to counterbalance the leaf, do not attempt to adjust or replace them yourself. Those components store enormous force, and a released spring can cause serious injury in an instant. That work belongs to a trained technician with the right tools and the right procedure. We’ll inspect and document the condition of those components, but we won’t hand you a DIY walkthrough that could get you hurt.

BeforeBefore
AfterAfter

How a Gate Parts & Welding Visit Works

  1. You call, we answer. A live person picks up at any hour, and we ask a few questions about the gate and what it’s doing.
  2. We inspect and photograph. The technician photographs the failure point: the cracked weld, the worn hinge, the misaligned latch. You see what we see.
  3. You get a written price. Flat price, written down, handed to you before any work begins. No “call for a quote,” no surprise at the end.
  4. We do the work. Parts go on, welds get made, and the gate gets cycled and checked under load.
  5. You get the record. A photo log of what was installed, the part numbers, and a written record of every adjustment, left with you and filed to your job record.

That documentation habit came out of commercial access-control work, where a missing wiring diagram or an unphotographed limit-switch setting means the next technician starts from zero. We brought the same standard to residential gates because homeowners deserve the same record. Under The Haven Standard Clause 4 (Evidence on every job), every visit includes a documented photo record at no additional charge.

What Gate Parts & Welding Cost in Boulder City

Technician applying sealant to a weathered metal gate post cap repair
What Gate Parts & Welding Cost in Boulder City

Most gate parts and welding calls in Boulder City land between $150 and $650, depending on whether a single part is being swapped or a weld needs to be cut out and redone. The table below shows typical line-item ranges. Your written price is the one that counts, and you get it before work starts.

Work Typical range
Hinge or latch replacement (parts + labor) $120 – $280
Weld repair at a stress point (post plate, frame corner, arm bracket) $150 – $400
Roller and track hardware service (sliding gate) $140 – $320
Full hinge set replacement on a swing gate $280 – $650
Replacement part sourcing and install (brand-matched) $90 – $250 plus part

If you’ve had another company out and they’ve written you an estimate, bring the paperwork. We’ll give you a free second opinion on any written estimate from another company, no charge and no obligation. Sometimes the number is fair and we’ll tell you so.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Areas We Cover

We serve Boulder City and the wider valley, including Henderson, Whitney, Paradise, Enterprise, Winchester, Sunrise Manor, and Spring Valley. If you’re on the edge of one of those areas and not sure we reach you, call and ask; the answer takes about thirty seconds. For a closer look at the parent service behind this page, see Gate Parts & Welding in Boulder City, and for the range of gate work we handle, start at our home page.

Neighbors who found us from a nearby city page often have the same problem: a gate that was installed with hardware that wasn’t rated for the traffic it gets. A gate parts and welding visit is a good time to correct that, because the part is already coming off.

FAQs

A professional welder performing wrought iron gate repair services
FAQs

How fast can you get to a gate parts & welding call in Boulder City?

Most calls get a same-day or next-day visit, and urgent situations get priority. A live person answers the phone 24 hours a day, seven days a week, so you can call at any hour and get a real answer about timing. Call (844) 320-7587.

Do you serve my area near Boulder City?

We cover Boulder City plus Henderson, Whitney, Paradise, Enterprise, Winchester, Sunrise Manor, and Spring Valley. If you’re unsure whether your address falls in range, call and we’ll confirm in a minute. Estimates are free.

How much does gate parts & welding cost in Boulder City?

Most jobs run $150 to $650 depending on whether a part is being swapped or a weld needs to be cut out and redone. You get a written, flat price before any work starts, so there’s no guessing. Call (844) 320-7587 for an exact quote; estimates are free.

Can you help after hours?

Yes. A live person answers the phone at any hour, and we dispatch after-hours calls for gates that are stuck open, stuck closed, or unsafe. Nobody gets a voicemail loop. Call (844) 320-7587 and we’ll take it from there.

Get a Written Price Before Anyone Picks Up a Tool

Vance Gate Repair has handled 22,000+ gate repairs and installations since 2014, and every one of them came with a written price before the job started and a documented photo record when the technician left. That’s The Haven Standard at work, and the 365-Day Done Right Promise backs it up: if a repair isn’t right, we make it right, with no argument and no fee within that year.

Your gate isn’t going to fix itself, and the weld that’s starting to crack won’t get better with another season of use. Call (844) 320-7587 for a free estimate. A live person answers at any hour, ready to schedule a visit, price the work in writing, and leave you with a record of everything we found.

Written by the team at Vance Gate Repair Boulder City, serving Boulder City and nearby areas.

What Our Customers Say

★★★★★ 4.7 from 7+ reviews

"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."

- Wes A.

"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."

- Terrence B.

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

- Douglas N.
Need Gate Repair help in Boulder City? Licensed & insured · within the hour response · free estimates
Call (844) 320-7587

Request a Free Estimate

Tell us what's going on in Boulder City. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch