Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Henderson, NV
If your driveway gate stopped opening, a side-yard gate is dragging on its hinge, or your opener clicks but nothing moves, we can help. Vance Gate Repair Boulder City handles Gate Repair in Henderson for homes from Green Valley to Anthem, and a live person answers the phone around the clock, so you reach us at (844) 320-7587 whenever the problem shows up. We work on nine major automation brands, we price every job in writing before a tool comes off the shelf, and we leave a documented record of what we found and what we changed. Whether you’re in 89011 or 89074, the call gets you a written price and a scheduled visit, not a callback queue.
Why Henderson Homeowners Choose Vance Gate Repair Boulder City
Most Henderson gate problems don’t announce themselves gently. A Mighty Mule arm quits mid-cycle on a Tuesday morning, or the ornamental iron in a Seven Hills courtyard starts sagging a quarter-inch where the stucco cracked. What homeowners want at that point is simple: the price in writing before work starts, and a record of what was done. That’s what The Haven Standard gives you every visit – a written scope, a photographed log of every adjustment and part number, and the 365-Day Done Right Promise behind the repair.
Our technicians have up to 12 years of experience and arrive background-checked and uniformed, with a name and photo sent before they turn into your driveway. They’re comfortable on a LiftMaster swing arm as much as an Elite slide operator, and they aren’t going to nudge you toward replacement when a limit switch or a worn hinge is the actual problem. Recent customers in Green Valley and Macdonald Ranch have told us the photo record was the part that set the visit apart – they could see the new hinge position and the serial number on the replaced part. If you’ve got a written estimate from another company, we’ll review it at no cost as a free second opinion. Detailed word on our process and pricing lives on our home page.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Henderson

We cover the full range of work a Henderson property might need, from a single hinge to a new automated swing gate. Each job starts with a written price, and each finishes with a documented photo record.
Gate Repair
Sagging gates, bent hinges, latches that won’t catch, and posts that have shifted off plumb are our most common calls in Henderson, and most are fixable in one visit. We diagnose before we quote, so the written price reflects the actual fault rather than a guess. Learn more about our Gate Repair in Henderson.

Gate Installation
New driveway, courtyard, or side-yard gates get measured, spec’d, and scheduled with a firm written price – no same-day promises, because good installation is planned. We work with wrought-iron and ornamental designs that meet HOA architectural review requirements. Learn more about our Gate Installation in Henderson.

Gate Motor & Opener
We service and replace motors and openers across nine major brands, including LiftMaster, DoorKing, and Mighty Mule, so we work with whatever is already on your property. Arm brackets, limit switches, and photo-eye alignment get documented on every visit. Learn more about our Gate Motor & Opener in Henderson.

Gate Access Control
Keypads, intercoms, and remote receivers get wired and programmed with a diagram left behind so the next technician isn’t guessing. This is the access-control habit that carried over from commercial sites into every residential job.
Gate Parts & Welding
Replacement hinges, rollers, latches, and welded repairs on ornamental iron keep an older gate in service rather than forcing a whole new install. Part numbers go in the record so a future repair is a known quantity.
Before
AfterNeighborhoods We Serve in Henderson
We work across Henderson’s master-planned communities and the older pockets around them. Most visits are scheduled within the same week, and repair calls typically get a slot within a day or two. If you’re in one of these areas, tell us on the call and we’ll route the right technician.
- Green Valley (89074)
- Anthem and Anthem Highlands (89044)
- Seven Hills (89052 area)
- Macdonald Ranch
- Lake Las Vegas and Calico Ridge (89011)
Why Henderson’s Climate & Housing Affect Gate Repair

Henderson’s housing stock is the single biggest driver of gate problems here. Most of the city went up in the 1990s and 2000s, dominated by Mediterranean and southwestern stucco homes with tile roofs, wrought-iron courtyard and side-yard gates, and block-wall perimeter fencing. That builder-grade hardware is now 20-plus years old and hitting its first major failure cycle – hinges worn oval, latches no longer catching square, opener arms past their service life. Layer on the Mojave heat, with regular 105°F+ summers that bake finishes and expand and contract metal, plus low humidity and fine desert dust working into every hinge and latch, and you get gates that drift out of alignment faster than in milder climates. UV exposure cracks decorative coatings long before the iron itself fails. The distinctive wrinkle in Anthem and Seven Hills is sloped lots: driveway gates sit on grades that make factory-standard hinge and opener setups drift within a few seasons, and HOA architectural guidelines mean any replacement must visually match the original ornamental iron. That’s why matching the design is as much a part of the job here as fixing the hinge.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Henderson
Most residential gate repairs in Henderson fall between $150 and $600, and the exact figure depends on the fault, the part, and whether welding is involved. Here’s the honest range:
| Service | Typical Range |
|---|---|
| Hinge, latch, or roller replacement | $150 – $320 |
| Limit switch reset or photo-eye realignment | $120 – $260 |
| Welded ornamental iron repair | $220 – $550 |
| Swing-gate motor replacement (arm bracket intact) | $650 – $1,400 |
| Access control keypad or receiver | $180 – $450 |
Under Haven Standard Clause 1, the price is written and handed to you before any work starts – no “call for a quote,” no invoice surprise at the end. If the number isn’t what you expected, you’ll know before we touch the gate. Call (844) 320-7587 for an exact quote on your Henderson property; estimates are free.
Service Area – Cities Near Henderson

We also schedule work just outside Henderson in Boulder City, Whitney, Paradise, and Enterprise. If you’re on the edge of one of these and want to know whether a visit covers your address, call and we’ll tell you straight. The same written-price, photo-record standard applies wherever we go.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Henderson

Most Henderson gate repairs run between $150 and $600 depending on the fault, with typical hinge and latch jobs in the $150-$320 range and welded iron repairs running higher. You get the written price before any work starts, so there’s no guessing about the final number. Call (844) 320-7587 for an exact quote – estimates are free.
Often, yes. Repair calls in Henderson typically get a same-day or next-day slot, and a live person answers the phone 24/7 so you can reach us whenever the gate fails. We won’t promise a dispatch time we can’t hold, but we’ll tell you the honest window when you call. Reach us at (844) 320-7587.
Almost certainly, because we service nine major automation brands including LiftMaster, DoorKing, Elite, and Mighty Mule. That means we adapt to the motor already on your property rather than steering you toward a replacement you don’t need. If you’re unsure what brand is on your gate, read the label on the control box and call us at (844) 320-7587.
An installation includes measuring the opening, planning for grade and HOA architectural review requirements, supplying the gate and hardware, and a written price agreed before work begins. Because good installation is measured and scheduled, we don’t promise same-day installs – we promise a free measure and a firm written price instead. Call (844) 320-7587 to get on the schedule.
Yes. Access-control wiring, keypads, receivers, and photo-eye safety edges are all part of what we do, and every connection gets documented with a diagram and photo record left with you. That record is what saves the next technician from re-tracing the same wires. Call (844) 320-7587 to talk through your setup.
Get a Written Price on Your Henderson Gate
If your gate is binding, your opener is failing, or you’re planning a new install, the fastest path is a phone call. Live person, no voicemail, any hour. We’ll schedule a visit, diagnose on-site, and hand you a written price before anything starts – backed by the 365-Day Done Right Promise and a documented photo record when we leave. Call (844) 320-7587 for a free estimate on your Henderson property.
Written by the team at Vance Gate Repair Boulder City.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Henderson Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.