Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
If you live in Henderson and your driveway gate has started to drag, your side-yard gate won’t latch, or your opener hums and does nothing, call us at (844) 320-7587. We connect you with independent local gate professionals who work Henderson every week, from Green Valley to Anthem to Macdonald Ranch, and we answer the phone with a live person at any hour. Henderson gates take a particular beating: Mojave heat, fine desert dust in the hinges, and two decades of builder-grade hardware reaching its first real failure. A repair that ignores any of that comes back. We price the job in writing before a tool comes out, so you know the number before the work starts.
Why Vance Gate Repair Boulder City Is Henderson’s Preferred Gate Repair Company
Henderson homeowners tend to research before they call, and we built our process around that. Under The Haven Standard, every visit gets a written scope and a written flat price handed over before any work begins, then a photographed record of what was found, what was adjusted, and what was installed. That documentation habit came out of commercial access-control work, where a wiring diagram and a limit-switch reading are the only things the next technician has to go on. We carried it onto residential gates.
The technicians we connect you with have up to 12 years of experience, are background-checked, and arrive in uniform with their name and photo sent before they reach your driveway. Our 365-Day Done Right Promise covers completed work for a full year: if a repair isn’t right, we make it right at no additional charge. And if you have a written estimate from another company, we’ll review it free before you sign anything. You can see how we run gate work generally on our Gate Repair page, or read more about local coverage on our Gate Repair in Henderson page.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Henderson

We handle residential and light commercial gates across Henderson’s ZIP codes 89011, 89044, 89012, and 89074, and we work on whatever motor is already on the property. Three priorities drive most of the calls here: alignment, post and hinge failure, and getting a manual gate automated properly.
Gate Realignment
Henderson’s master-planned neighborhoods sit on grades, and that changes realignment. Driveway gates in Anthem and Seven Hills often drift out of square within a few seasons because the gate travels on a slope and the original hardware was never set up to hold that swing weight. We check the post footing and the grade before touching the hinges, then reset travel and photograph the new position. Chasing the panel alone usually sends the gate right back out of alignment.

Hinge & Post Repair
On 1990s – 2000s stucco homes, the hinge post is often the real problem, not the gate. Builder-era posts were sometimes set shallow for the weight of an ornamental iron panel, and desert dust packs the hinges until the whole leaf drags. We diagnose the post before we replace metal, set a proper footing where one is needed, and match the hinge to the swing rather than swapping in whatever is on the shelf.

Automatic Gate Repair
When the operator is the issue, we service nine major brands, so we’re not pushing a replacement onto a motor that still has years left. A common Henderson call is a swing or slide operator that underperforms because it was added to a manual gate without the power and conduit run it needed. We trace the feed, confirm the safety photo-eye (the infrared beam that stops the gate if something crosses its path) and the loop detector still work, and write down what we set.

Electric Gate Repair
Electric gates here live through 105°F+ summers and fine grit that works into every moving joint. Electrical faults, dead limit switches, and controls that trip after a heat wave are routine. We diagnose the circuit and the controls, give you the price in writing, and leave a photo record of every reading so a future technician isn’t starting from scratch.
Before
AfterTrusted Brands We Service in Henderson
We service LiftMaster, DoorKing, Elite, Mighty Mule, and the rest of the nine major automation brands, and we don’t stock parts or tie you to one manufacturer. That matters on Henderson’s boom-built homes, where the operator on the gate may not be the brand in the neighbor’s yard two doors down. When a part is needed, we identify the exact model and part number, order what fits, and put it in writing. No steering toward a full replacement when a repair is the right call. Turnaround is quick because the diagnosis is done right the first time rather than guessed at.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes

- Sagging at the post, not the panel. Builder-grade hinge posts from the 1990s – 2000s building cycle settle or rust through, so the gate drops even though the iron itself is fine. Tightening hinges won’t fix a footing problem.
- Automation added to a manual gate. Many Henderson homes have a gate installed manual, then automated years later without the power or conduit run that should have gone in at build, leaving the operator underfed or running off a trip-hazard extension cord.
- Heat and dust in the moving parts. Regular 105°F+ Mojave summers expand and contract the metal and bake ornamental finishes until they crack, while desert dust packs hinges and latches. Hardware that would last elsewhere wears faster on a Henderson gate.
- Grade drift on sloped lots. Anthem and Seven Hills driveway gates sit on grades that throw factory-standard hinge and opener setups out of alignment within a few seasons, so the gate no longer tracks true.
Pricing for Gate Repair in Henderson, NV
Here are the ranges we see in Henderson’s market. A hinge replacement or hinge adjustment typically runs $150 – $320 per hinge set, and a hinge post reset or footing repair runs $350 – $750 depending on how deep the post has to go. Gate realignment on a sloped Anthem or Seven Hills lot runs $180 – $450, and automatic gate repair (operator, controls, or safety photo-eye and loop detector work) runs $200 – $600 before any parts. Electric gate repair involving a circuit or control fault runs $220 – $650. What moves the number is the condition of the post and footing, whether the power and conduit are already in place, and whether a replacement part has to be ordered. Every price is written and handed over before work starts, and estimates are free. Call (844) 320-7587 for your exact quote.
We Also Serve Cities Near Henderson

We also connect homeowners with gate work in Boulder City, Whitney, Paradise, and Enterprise, and the same written price and photo record apply wherever the job is. Anthem and Seven Hills sit right against the foothills, so a fair number of our Henderson-area requests come from just over the line. Call (844) 320-7587 and we’ll tell you what covers your address.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Henderson

Yes, and it’s one of the most common upgrades we see in Henderson, but it’s a power question first, not an opener question. The gate itself usually takes an operator fine; what’s often missing is the dedicated power and conduit run that should have gone in at build, which is why so many manual gates here get automated with a cord running across the driveway. We check the feed and the swing geometry, then quote the wiring and the operator in writing before anything is installed.
For a straight repair, usually not, but for anything that changes the gate’s appearance or replaces ornamental iron, expect the architectural review committee to want design-matching approval first. Henderson’s master-planned communities like Green Valley, Anthem, Seven Hills, and Macdonald Ranch all sit under HOA review, so a replacement has to visually match the approved wrought-iron or ornamental design before it’s a hardware question at all. We document the existing gate with photos so you have what the committee needs, and we build the repair to match.
Because the problem is almost always the hinge post or its footing, not the hinges. On Henderson’s 1990s – 2000s stucco homes, the original post was often set shallow for the weight of the panel and has since settled or rusted through, so the gate drops at the post while the iron leaf is still sound. Tightening the hinges just fights the post. A proper sag correction checks the footing first, and on a sloped lot it accounts for grade drift before the realignment holds.
Check the power feed and the safety photo-eye before you assume the motor has failed. A gate that hums and won’t move, or one that reverses halfway, is often a misaligned photo-eye or a tripped control rather than a dead operator. Desert dust on the beam and a heat-swelled limit switch cause a lot of false alarms here. If the feed is suspect, that’s an electrical question and worth having a trained professional look at it. Call (844) 320-7587 and we’ll diagnose it and put the price in writing.
Yes, and it does it faster here than in milder climates. The Mojave heat bakes ornamental coatings until they fade and crack, and the daily expansion and contraction loosens joints and throws sloped driveway gates out of alignment. Fine desert dust works into hinges and latches and packs them until the gate drags. That’s why we set and photograph hardware to suit Henderson conditions rather than installing it the way you would somewhere cooler. Call (844) 320-7587 for a free estimate.
Whether your gate needs a hinge post reset, a realignment on a sloped lot, or an operator added properly with the power run it should have had all along, the next step is the same: a written price before anyone starts. Call (844) 320-7587 for a free estimate. A live person answers at any hour, and we’ll connect you with a background-checked local professional who works Henderson.
Written by the team at Vance Gate Repair.