A Vance company - serving Boulder City, NV
Vance Gate Repair Boulder City gate repair team

Gate Repair Cost in Boulder City - Honest Price Ranges, Free Written Quote

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Repair Cost in Boulder City?

Most gate repairs in Boulder City run $165 to $725, with the typical single-issue repair landing around $280. Simple fixes like a misaligned photo-eye or a reset limit switch usually cost $150 to $250, while a swing-gate opener replacement with new hardware runs $520 to $1,180 depending on the motor brand and whether the arm bracket is intact. Every price we quote is written down before a technician touches the gate, so you know the total before work begins.

Key Takeaways

  • Typical gate repair in Boulder City: $280. Range: $165 to $725 for most single-issue jobs.
  • Opener and motor replacements cost more: $520 to $1,180, driven mainly by brand and bracket condition.
  • Weld and structural work on metal gates: $195 to $640.
  • Boulder City’s desert wind and sun exposure accelerate hinge wear, sensor misalignment, and photo-eye faults faster than in milder climates.
  • Our written price arrives before any work starts. No “call for a quote” and no invoice surprises at the end.

Gate Repair Cost Breakdown (2026)

professional gate repair service
Gate Repair Cost Breakdown (2026)

The line items below reflect what we actually bill in Boulder City this year. If your gate has more than one problem, the total stacks but comes in lower than booking separate visits.

Repair Type Typical Range What It Covers
Photo-eye alignment $150 – $250 Realigning the infrared safety beam (the sensor that stops the gate if something crosses the path), testing both directions, photo documentation
Limit switch reset or replacement $165 – $310 Adjusting travel limits, replacing a failed switch, testing full open/close cycles
Hinge and roller replacement $180 – $420 Replacing worn hinges or rollers on swing or sliding gates, lubricating tracks and pivot points
Gate arm or actuator repair $260 – $560 Repairing or replacing a swing-gate arm, actuator, or torque arm
Control board or receiver repair $290 – $690 Replacing a failed control board, receiver, or safety-loop module
Swing-gate opener replacement $520 – $1,180 New motor, arm bracket if needed, wiring, limit settings, photo-eye repositioning
Sliding-gate motor replacement $560 – $1,240 New rack-and-pinion motor or equivalent, alignment, chain/rack adjustment
Gate welding (hinge reattach, post repair) $195 – $640 Mobile welding on steel gates, post reattachment, hinge reinforcement, paint touch-up
Keypad or entry system repair $175 – $440 Keypad replacement, wiring, access-code reset, intercom integration
Diagnostic visit (applied to repair) $95 – $150 Full inspection, written findings, photo record; credited toward the repair total

What pushes a repair toward the top of its range? Brand of automation matters a lot. A LiftMaster or FAAC swing operator usually has parts available and predictable labor. A Mighty Mule or BFT unit in Boulder City might need a full motor swap because the internal gearbox has a limited repair path. Bracket condition is the second driver; if the arm bracket is bent or the mounting post is loose, we factor 30 to 60 minutes of structural work. Site access – a gate set back on a long gravel drive off Nevada Way or tucked against a hillside on the edge of the historic district – can add a travel or access charge. We tell you which cost bumps apply to your gate before we pick up a tool.

BeforeBefore
AfterAfter

What Affects Gate Repair Pricing in Boulder City

  • Automation brand and vintage. We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Older BFT and Linear units sometimes need a full motor replacement because replacement parts are scarce, while LiftMaster and Elite units frequently have repair paths that keep the job in the $260 to $420 range.
  • Desert sun and wind. In Boulder City, we regularly see hinge wear and photo-eye misalignment in late spring as seasonal winds push gates into frame contact. UV exposure cracks plastic covers and dries out hinge bushings six to twelve months faster than coastal climates. That wear pattern means hinge and sensor jobs come up more often here than structural ones.
  • Gate weight and material. Steel double swing gates and heavy wrought-iron entries take more time to align and test than a light aluminum single gate. Welding on heavy steel adds material cost and a paint touch-up step.
  • Wiring condition. If the low-voltage wire from the house to the gate is buried, damaged, or was run without conduit, a control-board repair can turn into a wire-run job. We test wire continuity before quoting the repair so you’re not surprised by a second visit.
  • Access and slope. Gate posts on a slope or set far from the driveway apron take longer to set up and test. In the Boulder City hillside neighborhoods, we occasionally need extra time to reposition ramps and shims.
  • Whether the gate is a repair or a replace decision. If a 12-year-old motor with a cracked gearbox and a failed control board lands at $700 in repairs and a comparable new unit is $980 installed, we’ll show you both numbers in writing so you can choose.

How to Save on Gate Repair

Technician applying sealant to a weathered metal gate post cap repair
How to Save on Gate Repair

You don’t have to accept the first number you hear, and you don’t have to overpay for a repair that could have been a $185 photo-eye adjustment.

  • Get the diagnosis in writing before you authorize anything. Verbal estimates tend to grow. A written scope with a flat price can’t. We hand you the price before work starts under Haven Standard Clause 1.
  • Bundle small issues into one visit. If your gate has a sticky hinge, a photo-eye that trips the reverse, and a keypad that doesn’t respond, all three can be handled in one service call for less than booking three separate appointments.
  • Ask for a free second opinion on another company’s estimate. Bring the written quote and we’ll review it at no charge. We’ve caught double-billed control boards and repairs that didn’t match the stated symptom.
  • Keep the gate lubricated and clear of debris. A five-minute seasonal lubrication of hinges and the track keeps wear-related repairs out of your budget for years. We can show you which points to hit during any visit.
  • Ask about the 365-Day Done Right Promise. If the repair isn’t right within a full year, we make it right at no additional charge. That coverage is part of every job we do, so you’re not paying twice for the same fix.

Free estimates and a written price are how every Vance Gate Repair job starts. Call (844) 320-7587 and we’ll take the information over the phone and send a written scope the same day.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

What to Expect on a Repair Visit: Step by Step

  1. Phone intake. A live person answers 24 hours a day. We ask for the gate type, automation brand, and what the gate is doing (or not doing). That helps us send the right technician and parts.
  2. Written scope and price. Our technician inspects the gate on arrival, writes the diagnosis and flat price on a scope sheet, and hands it to you before any work starts. You approve or you don’t. No work happens until you’ve seen the number.
  3. Repair and verification. We complete the repair, then run the gate through full open/close cycles with the safety photo-eye tested in both directions. We photograph the limit-switch settings after adjustment.
  4. Documentation and handoff. Before we leave, you get a photo log of what we found, what we adjusted, and the part numbers replaced. That record gets filed in the job folder so the next technician has a documented starting point.

This documentation is why we don’t have to guess on repeat visits, and why the next company (or the next technician, if it’s us) isn’t starting from zero. The habit came from Adrian Vance’s commercial access-control work starting in 2014, where a wiring diagram photographed and filed on install day saves hours on every service call that follows.

Is It Cheaper to Repair or Replace a Gate?

A professional welder performing wrought iron gate repair services
Is It Cheaper to Repair or Replace a Gate?

Repair is almost always cheaper than replacing the gate itself. A failing opener or control board is a repair; a bent, rusted, or structurally compromised gate panel is a replacement decision. The repair-vs-replace math only gets murky when the automation is 10 or more years old and two or more major components have failed. Our technicians have up to 12 years of experience with that call, and we’ll put both numbers in writing so you’re choosing between two dollar figures, not two sales pitches. If you’re weighing a new gate on top of a repair, see our Gate Repair in Boulder City page for the full picture on repair scope and timing.

Gate Repair Cost in Boulder City FAQs

How much does a typical gate repair cost in Boulder City?

Most gate repairs in Boulder City cost $280, with the full range for single-issue jobs running $165 to $725. A photo-eye alignment is at the low end around $150 to $250; a control-board replacement or full opener swap sits at the top. Call (844) 320-7587 for an exact written quote – estimates are free.

Do you charge a diagnostic fee for gate repair in Boulder City?

Diagnostic visits run $95 to $150 and are credited toward the repair total if you move forward with the work. You get a written diagnosis and a photo record of the findings either way. Call (844) 320-7587 to schedule.

Can you repair my gate the same day in Boulder City?

Often, yes. A live person answers the phone 24 hours a day, and same-day service is possible for many common repairs – photo-eye faults, limit switches, hinge replacement, and keypad issues. A full opener replacement may need a next-day visit if we need a specific brand part. Call (844) 320-7587 and we’ll tell you what’s available today.

Why is my gate opening and closing on its own?

Spontaneous cycling in Boulder City gates is commonly a misaligned photo-eye, a limit switch set past travel, or a failing control receiver. The repair typically costs $165 to $400. When a gate cycles by itself, it can also be a safety issue; call (844) 320-7587 rather than waiting for it to get worse.

What if another company quoted me more for the repair?

Bring the written estimate to us and we’ll review it at no charge. We’ve seen quotes of $900+ for a $280 limit-switch repair. If the second quote is legitimate, we’ll say so. If it’s not, we’ll show you why. Call (844) 320-7587 to set that up.

Safe Handling: When to Call a Technician

Professional welder performing metal gate repair and installation on a fence post
Safe Handling: When to Call a Technician

Gate openers run on 12-volt or 24-volt DC motor power but connect to a 120-volt circuit at the transformer, and commercial-grade operators can run on 220. If the motor hums, the breaker trips, or you smell hot plastic at the control box, stop cycling the gate and call us. Do not open the control box, splice the low-voltage wire, or attempt to reset a limit switch by trial and error; a gate that cycles unexpectedly can strike a person, a pet, or a vehicle. Our technicians are background-checked, uniformed, and have the diagnostic tools and wiring diagrams to trace the fault safely. You’ll get a name and photo of the technician before arrival and their license information on the visit record.

Why Boulder City Homeowners Choose Vance Gate Repair

We price in writing before work begins. That’s not a slogan, it’s Haven Standard Clause 1. Every visit leaves a documented photo record of what we found, what we adjusted, and what we installed, filed in your job folder and left with you. The 365-Day Done Right Promise covers every completed repair: if it isn’t right within a full year, we make it right at no additional charge.

We work on whatever motor is already on your property rather than steering you toward a replacement, and we service nine major automation brands so we’re not stuck when your gate says FAAC or DoorKing instead of the brand we happen to stock that week. Since 2014, we’ve completed more than 22,000 gate repairs and installations. Pricing on all of those jobs went down on paper before the work started.

Whether you need a quick photo-eye alignment or a full swing-gate motor replacement, you’re one call away from a written price and a scheduled visit. Call (844) 320-7587 for a free estimate. A live person is on the line at any hour, no voicemail loop, no callback queue. You’ll know the price before we start, and you’ll have a written record when we’re done.

Written by the team at Vance Gate Repair.

Related Services and Guides

professional gate installation service
Related Services and Guides
  • Vance Gate Repair – gate repair, installation, motor service, access control, and welding across Boulder City
  • Gate Repair in Boulder City – full service overview, brands serviced, and what to expect on a visit
  • Gate opener and motor repair cost guide – what to expect when your LiftMaster, FAAC, or Mighty Mule operator fails
  • Gate installation cost guide – new gate pricing by material, width, and automation
  • Gate access control and keypad repair guide – entry systems, intercoms, and code issues
  • Gate welding and structural repair guide – hinge reattachment, post repair, and finish
  • Photo-eye and safety sensor guide – why your gate reverses unexpectedly and what it costs to fix
  • Limit switch adjustment guide – cycling faults, over-travel, and reset costs
  • Gate hinge and roller maintenance guide – seasonal lubrication and what to check
  • Swing gate vs. sliding gate cost comparison – repair and replacement numbers side by side
  • Gate repair in Henderson, NV – nearby city pricing and scheduling
  • Gate repair in Las Vegas, NV – nearby city pricing and scheduling

Pricing reflects the Boulder City market as of 2026. Vance Gate Repair Boulder City offers free estimates – call (844) 320-7587.

What Our Customers Say

★★★★★ 4.7 from 7+ reviews

"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."

- Wes A.

"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."

- Terrence B.

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

- Douglas N.
Need Gate Repair help in Boulder City? Licensed & insured · within the hour response · free estimates
Call (844) 320-7587

Request a Free Estimate

Tell us what's going on in Boulder City. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch