A Vance company - serving Boulder City, NV

Lock Repair in Boulder City, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lock Repair in Boulder City, NV

Gate lock repair in Boulder City, NV typically costs $95 to $280, and most calls we handle are finished the same day. That covers everything from a stiff keyed cylinder on a pedestrian gate to a magnetic lock that no longer releases on a DoorKing keypad. If your gate won’t latch, won’t open from the keypad, or the key has stopped turning cleanly, we’re the crew to call at (844) 320-7587.

We’re Vance Gate Repair Boulder City, and locks are where our access-control background shows. A gate lock is not a house lock: it lives outdoors, in desert sun, wind-blown grit, and temperature swings that work on metal every single day. We treat it that way. Every lock repair under our Gate Repair service follows The Haven Standard: a written price before we touch a tool, a photographic record of what we found and what we set, and the 365-Day Done Right Promise on the finished work.

Our technicians have up to 12 years of experience across nine major gate-automation brands, including DoorKing, Elite, Mighty Mule, and LiftMaster. That matters on lock work, because the lock is usually tied to the operator, the keypad, or the access controller, and a technician who only knows one brand tends to guess at the other two.

Key Takeaways

  • Most gate lock repairs in Boulder City run $95 to $280, priced in writing before any work begins.
  • We repair keyed cylinders, latch assemblies, electric strikes, magnetic locks, and keypad-linked locking hardware on residential and light commercial gates.
  • Same-day service is common; a live person answers at (844) 320-7587 any hour.
  • Every visit includes a photo record of the lock, the strike plate, and the final alignment, filed in the job log.
  • Free second opinion on any written estimate another company has already handed you.

When You Need Lock Repair

professional gate repair service
When You Need Lock Repair

Some lock failures are obvious. Others walk in quietly and you only notice after a month of jiggling the key. Here are the ones we hear most in Boulder City:

  • The key turns hard or won’t turn at all. On gates near the dry lakebed side of town, windblown grit packs into the cylinder pins and the key starts fighting you around the halfway point. That’s not “wear” – that’s debris. We flush, re-pin if needed, and re-lubricate with a dry graphite that won’t collect more grit.
  • The gate swings open in a breeze it used to ignore. The latch isn’t fully engaging. Either the strike plate has drifted a quarter inch or the latch bolt has worn at its tip, and the gate looks closed without actually locking. We photograph the gap and set it right.
  • The keypad won’t release the lock. A maglock or electric strike that stays engaged after a valid code usually means the access controller isn’t seeing the request, the relay has failed, or the wiring has a break. We trace it, document the readings, and tell you exactly which part failed.
  • The lock buzzes or clicks when it shouldn’t. On LiftMaster and Elite operators with lock-integrated boards, a buzz at rest often points to a failing solenoid or a low-voltage condition. Left alone, it eventually burns out the controller board, and that’s a much bigger job than the lock repair.
  • The gate won’t latch fully closed, even by hand. The gate may have dropped on its hinges, throwing the lock and the strike out of alignment. This is a lock symptom with a hinge or post cause, and treating it as a lock problem alone leaves you with the same fix next year.
  • Someone tried to force it. A pry-marked strike, a bent bolt, or a pushed-in lock face. We assess whether the parent post or the gate frame took damage, document it for your records, and rebuild the locking hardware so it engages cleanly. Call (844) 320-7587 – we’d rather you call before someone finishes the job they started.
BeforeBefore
AfterAfter

Our Lock Repair Process

Here’s exactly what happens on a lock repair visit. This is the same sequence our technicians walk every time, and it’s why we can price the job in writing before starting:

  1. Photograph and document the baseline. We photograph the lock face, the strike plate, the gate position, and the controller status before touching anything. That record goes into the job file so the next technician – even if it’s you – knows where things started.
  2. Test the lock in isolation. We operate it by hand, then through its access method (keypad, fob, intercom), and measure. If the lock itself works fine but the keypad won’t release it, we know the problem is upstream before we bill for a lock swap.
  3. Write the price and hand it over. Under Clause 1 of the Haven Standard (“Have it in writing”), you get a written scope and a written price before any work begins. No verbal quote. No surprise on the invoice.
  4. Perform the repair. Whether it’s re-pinning a keyed cylinder, replacing a latch bolt, aligning a strike plate, swapping an electric strike, or replacing a magnetic lock, we install the correct part and confirm it meets the manufacturer’s spec for the operator on your gate.
  5. Test and document the finish. We cycle the lock ten or more times, photograph the final alignment, note the part numbers installed, and leave you with a photo log of every adjustment. Under Clause 4 (“Evidence on every job”), this record is included at no charge.

Every repair is covered by the 365-Day Done Right Promise. If the lock fails in the way we fixed it, we come back and make it right at no charge.

If the lock problem is part of a larger gate issue – a motor that doesn’t reverse, a sagging arm, a broken hinge – see our Gate Repair in Boulder City page for the full range of repair work.

Lock Repair Pricing in Boulder City

Technician applying sealant to a weathered metal gate post cap repair
Lock Repair Pricing in Boulder City

We publish ranges because you should be able to do the math before you pick up the phone. Real prices depend on the lock type, whether the cause is mechanical or electrical, and whether we can fix the part or must replace it. Below are the ranges we see in Boulder City:

Lock repair service Typical range What affects cost
Keyed cylinder repair or re-pin $95 – $180 Number of pins, whether the cylinder is standard or high-security
Latch bolt or strike plate realignment $120 – $220 Whether the gate has dropped and needs hinge adjustment too
Electric strike replacement $180 – $320 Brand (DoorKing, Elite), voltage, and whether wiring runs need rerouting
Magnetic lock service or replacement $220 – $420 Holding force rating, controller compatibility, and wiring condition
Keypad or reader lock-release troubleshooting $150 – $260 Whether the fault is in the controller, relay, or wiring run
Forced-entry lock rebuild $200 – $400+ Frame or post damage, and whether the locking hardware must be custom-fit

A few real-world notes. On LiftMaster and Elite operators, the lock hardware is often part of the operator’s accessory set, so replacing it also means confirming board compatibility – a step we do at no extra charge as part of the flat price. On older gates in the historic district, we sometimes find a custom-fit strike that has to be matched by hand; we tell you that in the written quote, not after the fact. If you’ve already received a written estimate from another company and want a second set of eyes on it, we review it for free. That’s not a sales tactic – it’s the same habit we carried over from access-control work, where paperwork disconnects cost real money.

Call (844) 320-7587 for an exact quote on your gate. The written price is delivered before any work starts, and there’s no charge to look.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs – Lock Repair

How much does gate lock repair cost in Boulder City?

Most gate lock repairs in Boulder City run between $95 and $280, with electric and magnetic lock work at the higher end of that range. Keyed-cylinder work is usually the least expensive, and forced-entry rebuilds cost more because the frame is often involved. Call (844) 320-7587 for an exact quote – estimates are free and the written price is handed to you before any tool comes out.

Can you repair my gate lock the same day?

Yes – most lock repairs we handle in Boulder City are completed on the same day. Common parts like standard keyed cylinders, latch bolts, and strike plates are typically on hand, while electric and magnetic locks may need a return visit if a specific brand’s part isn’t immediately available. A live person answers at (844) 320-7587 any hour of the day, so call and we’ll tell you honestly what today looks like.

What brands of gate locks and access hardware do you service?

We service lock and access hardware across nine major automation brands, including DoorKing, Elite, Mighty Mule, and LiftMaster. That range matters because lock hardware is rarely a standalone part – it usually ties into the operator or access controller, and a technician who only knows one brand may steer you toward a replacement when repair is the right call. We work with what’s already on your gate.

Why does my keypad not release the gate lock?

A keypad that won’t release the lock is usually a controller, relay, or wiring fault, not a lock fault. The keypad sends a valid code, but the signal never reaches the lock, or the lock receives it and stays engaged. We test the lock in isolation, trace the release signal, and document the readings so we can fix the actual cause rather than swapping the lock and hoping. Call (844) 320-7587 and we’ll come out to diagnose it.

What is the 365-Day Done Right Promise on lock repair?

If a repair we completed fails in the way we fixed it, we come back and make it right within a full year of the job – no argument, no fee, no expiration date inside that window. It applies to every lock repair we perform, and it’s backed by the same documented photo record we leave on every visit. If you’re unsure whether a current problem falls under the promise, call (844) 320-7587 and we’ll check the job record for you.

Do you offer a free second opinion on a lock repair estimate?

Yes. If another company has handed you a written estimate for gate lock work, bring the paperwork and we’ll review it at no cost. We’ll tell you plainly whether the scope matches the symptom, whether the price is in line for Boulder City, and whether repair makes more sense than replacement. That review is free and there’s no obligation to book the work with us.

Get Your Gate Lock Fixed in Boulder City

A professional welder performing wrought iron gate repair services
Get Your Gate Lock Fixed in Boulder City

Gate lock problems tend to get worse on their own schedule. A latch that won’t seat lets the gate ride a few degrees off every swing, and a buzzing maglock can quietly take the controller board with it. Get ahead of both with a call to (844) 320-7587. A live person answers around the clock, the written price arrives before any work begins, and you’ll get a photo record of what we found, what we set, and what we installed. That’s the Haven Standard on every Boulder City visit.

Written by the team at Vance Gate Repair Boulder City, serving Boulder City.

Need Gate Repair help in Boulder City? Licensed & insured · within the hour response · free estimates
Call (844) 320-7587
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Vance Gate Repair Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch