Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Boulder City, NV
Automatic gate repair in Boulder City usually costs between $185 and $650, depending on whether the problem is a misaligned photo-eye, a worn drive gear, or a failed control board. Most swing-gate and slide-gate faults can be diagnosed and corrected on the first visit when the technician arrives with the right documentation habit and the right parts for your motor. An automatic gate that hesitates, reverses mid-travel, or stops responding to the remote is telling you something specific, and our job is to read that signal instead of guessing at it.
Vance Gate Repair Boulder City approaches automatic gates the way access-control work demands: written price before any tool comes out, a photographed record of every setting we touch, and a limit-switch reading left in the job file. If your gate opener is a LiftMaster, an Elite, a DoorKing, or a Mighty Mule, we’ve worked on that platform. Our technicians have up to 12 years of experience, and a live person answers the phone 24 hours a day at (844) 320-7587. When the fault turns out to be mechanical rather than electronic, we hand the broader work over to our Gate Repair service and fold it into the same written scope.
When You Need Automatic Gate Repair
Boulder City sits in the Mojave at roughly 2,500 feet, and that matters to gate hardware. Summer afternoons push past 105°F, winter nights drop near freezing, and the daily swing between the two is hard on lubricants, plastic gears, and battery-backed control boards. The dust that blows in off the Eldorado Valley works its way into track rollers and photo-eye lenses. Here are the symptoms we see most often:
- The gate reverses without warning. A photo-eye (the infrared beam that stops the gate if something crosses the path) is usually misaligned by an inch or two, or the lens is coated with dust. This is one of the quickest fixes we do.
- The gate opens partway, then stops. A limit switch that’s drifted or a control board that’s lost its travel memory. We read the switch position, reset it, and photograph the new setting so the next visit doesn’t start from zero.
- The motor hums but the gate doesn’t move. On older swing operators this is often a stripped drive gear or a failed capacitor. On slide gates, a worn chain or a bound track roller.
- The remote works only up close, or not at all. Receiver interference, a dying battery in the transmitter, or a board that’s lost its rolling-code pairing after a power surge from a monsoon-season lightning strike.
- The gate sags, drags, or scrapes the ground. Hinge wear on a swing gate or a settled post. We correct the mechanical bind before touching the electronics, because a motor fighting a dragging gate will burn itself out.
- Safety reverse fails the obstruction test. This one gets priority. If the gate doesn’t reverse when it meets an object, it isn’t safe to run, and we’ll say so plainly.
Our Automatic Gate Repair Process

Every Vance visit follows the same sequence, and it’s built around one idea: no future technician should have to rediscover what we already found.
- Written price before any work. Under Clause 1 of The Haven Standard, you get a flat written price for the diagnostic and repair scope before anyone picks up a tool. No “call for a quote,” no invoice surprise at the end.
- Photograph the starting condition. We document the gate’s open position, the operator housing, the wiring at the control board, and the limit-switch settings as we found them.
- Test the safety circuit first. Photo-eyes, edge sensors, and the obstruction reverse get checked before we run the gate under power. If a safety device is failing, that gets corrected before anything else.
- Diagnose the fault to the component. We read voltage at the board, check the motor draw, and inspect the mechanical drive. The written record names the part, not just “the opener.”
- Repair, adjust, and re-test. Once the fix is in, we cycle the gate through full open and close several times, re-run the obstruction test, and confirm the limits hold.
- Leave the documented record. Before we go, you get a photo log of every adjustment and a written record of any part number installed. We underwrite the repair under the 365-Day Done Right Promise: if it isn’t right within that year, we make it right at no charge.
Before
AfterAutomatic Gate Repair Pricing in Boulder City
Here’s what automatic gate repair actually runs in the Boulder City market. These are line-item ranges, and your written price will match the scope before work starts.
| Repair | Typical Range | Notes |
|---|---|---|
| Photo-eye realignment or replacement | $145 – $260 | Includes lens cleaning and obstruction re-test |
| Limit switch reset or replacement | $165 – $310 | Travel re-learned and photographed |
| Control board replacement | $310 – $650 | Brand-dependent; doorKing and liftmaster boards sit at the higher end |
| Swing-gate drive gear or capacitor | $220 – $480 | Motor draw checked after repair |
| Slide-gate chain or roller service | $185 – $420 | Track inspection included |
| Remote/receiver re-pairing | $95 – $175 | Rolling-code re-sync and range test |
What moves the price: the brand and age of the operator, whether the arm bracket or hinge hardware is intact, and whether a power surge damaged more than one component. A gate post that’s settled will add to the mechanical side of the job. Because we service nine major automation brands including LiftMaster, Elite, and DoorKing, we can usually work with the motor already on your property rather than quote a replacement. If you’re holding a written estimate from another company, we’ll review it for free as a second opinion. All ranges assume a standard residential driveway gate in Boulder City.
FAQs – Automatic Gate Repair

How much does automatic gate repair cost in Boulder City?
Most automatic gate repairs in Boulder City land between $145 and $650, with the widest costs tied to control-board replacement and swing-gate gear work. Photo-eye and limit-switch fixes sit at the lower end. You get the flat written price before work starts, so the number doesn’t move once we’re on site. Call (844) 320-7587 for an exact quote, and estimates are free.
Can you fix my automatic gate the same day?
Same-day repair is common when the fault is a photo-eye, limit switch, or remote pairing, because those parts are typical of the platforms we carry knowledge of. Board and gear failures depend on the brand and the part number. A live person answers the phone 24 hours a day, so call (844) 320-7587 and we’ll tell you what’s realistic before we dispatch.
Which gate opener brands do you repair?
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we work across those nine platforms, we can diagnose whatever motor is already on your property rather than steering you toward a new one. That matters most on older gates where the operator is sound and only a component has failed.
Is it cheaper to repair my gate or replace the opener?
Repair is almost always the lower-cost path when the motor, gearbox, and control board are otherwise healthy, and most of the faults we see in Boulder City are component-level. Replacement makes sense when the board is obsolete, the drive is seized, or the operator no longer meets current safety-reverse requirements. We price the repair first and tell you in writing if replacement is the honest answer.
What’s the 365-Day Done Right Promise?
It’s a full year on completed work: if the repair isn’t right within that window, we make it right at no additional charge, no argument, no fee. Combined with the written price before work and the photo record we leave behind, it means you’re not paying twice to rediscover the same problem. Call (844) 320-7587 for a free estimate and a written scope.
An automatic gate that fails its safety reverse shouldn’t be run until it’s corrected. If your Boulder City gate is hesitating, reversing on its own, or ignoring the remote, call (844) 320-7587 and a live person will pick up. We’ll give you the written price before any work starts, document what we found and fixed, and stand behind it under the 365-Day Done Right Promise. For broader gate work, see our Gate Repair in Boulder City page, and start at our home page to see the rest of what we handle.
Written by the team at Vance Gate Repair Boulder City, serving Boulder City.