A Vance company - serving Boulder City, NV
Vance Gate Repair Boulder City gate repair team

Gate Installation Cost in Boulder City - Honest Price Ranges, Free Written Quote

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Installation Cost in Boulder City?

Gate installation in Boulder City runs from about $1,650 for a basic single-panel ornamental aluminum walk gate to $9,800 or more for a wide double-drive steel gate with a LiftMaster or FAAC operator and concrete footings. A typical driveway gate, installed and automated, lands between $4,200 and $7,500. Those ranges include the gate, the posts and footings, the hardware, and the opener; concrete work on sloped lots and older masonry walls pushes the number up.

We price in writing before anyone starts. Every estimate we hand over names the gate material, the post spec, the operator brand, the concrete yardage and the permits, so the number you read is the number you pay. Call (844) 320-7587 for a free estimate on your Boulder City property.

Key Takeaways

  • Most Boulder City driveway gates, installed and automated, cost between $4,200 and $7,500.
  • Walk gates start around $1,650; large double-drive gates with commercial-grade operators top $9,800.
  • Post-and-footing work is the single biggest swing factor: a footing set in caliche can add $400 to $900.
  • Boulder City properties inside the historic district need to clear the Historic Preservation Commission before a new gate on a street-facing wall goes up.
  • We write the price down before we lift a tool, and every visit ends with a photo record of what we installed.

Gate Installation Cost Breakdown (2026)

The table below is what we quote in Boulder City this year. Each line is a real range we work with, not a national average pulled off a comparison site.

Line item Typical range What’s included
Single walk gate (aluminum or steel frame) $1,650 – $2,900 Gate panel, hinges, latches, posts, install
Single swing driveway gate (steel or ornamental) $3,200 – $5,400 Gate panel, posts, footings, hardware, install
Double swing driveway gate $5,500 – $8,900 Two panels, center posts, footings, hardware
Sliding gate (cantilever or track) $4,800 – $9,500 Gate, track or cantilever kit, posts, install
Swing gate opener (one arm) $950 – $1,900 Operator, arm bracket, wiring, install
Sliding gate opener $1,100 – $2,300 Operator, chain or rack, limit switches, wiring
Concrete footings and pier work $400 – $1,200 Excavation, rebar, pour, cure
Electrical run to the gate (up to 100 ft) $600 – $1,800 Conduit, trench, low-voltage or line-voltage wiring
Keypad, intercom, or loop detector $350 – $1,400 Device, wiring, programming, test
Painting or powder-coat upgrade $250 – $900 Finish, prep, cure
Boulder City building permit $150 – $450 Filed and inspected to city code

A few things move the total. The gate panel itself is only part of the cost; the footings, wiring and operator often make up 40% to 55% of the job. A flat lot with a clean electrical source keeps you near the low end. A lot cut into a slope, a deed-restricted HOA with a specific gate design, or an older wall with no footing to anchor to pushes you toward the top. When we quote, we break the total out by line so you can see exactly where the money goes instead of getting one lump figure over the phone.

What Affects Gate Installation Pricing in Boulder City

Professional welder performing metal gate repair and installation on a fence post
What Affects Gate Installation Pricing in Boulder City

Boulder City is not Henderson or Las Vegas, and the job reflects that. Here’s what we account for on every estimate.

  • Caliche and hardpan ground. Much of the ground here is compacted caliche, and digging footings through it takes longer and heavier equipment than soft soil. On the properties we work in Boulder City, caliche or hardpan on the footing line is common, and it adds roughly $400 to $900 to the concrete line. We know before we quote because we probe the ground first.
  • Historic district review. A gate on a street-facing wall inside the Boulder City Historic District may need to clear the Historic Preservation Commission before installation. That review adds time and, sometimes, a design change. We flag it in the written estimate so you’re not surprised two weeks in.
  • Desert wind load. Boulder City sits in a wind-prone stretch above the valley floor, and a wide gate is a sail in a gust. We spec heavier posts and a stouter operator for wide double gates here than we would in a sheltered neighborhood. That adds to the hardware line but saves the gate.
  • Distance to power and gate opener brand. If the nearest power is 80 feet from the gate line, conduit and trenching come into the price. And the operator you pick matters: a LiftMaster, FAAC or DoorKing unit runs a different price than a Ghost Controls or Mighty Mule, and we service all nine of the major brands, so we quote to what fits your gate and your power.
  • Gate material and design. Ornamental aluminum is lighter and cheaper than steel; a custom steel double gate with decorative work is at the top of the range. An HOA with a set gate design narrows your options, and a custom design widens the price.
  • Whether you’re automating at install or later. Running the wiring and setting the arm bracket during the install is cheaper than retrofitting an opener onto a finished gate. If you think you’ll want automation in a year or two, tell us now and we’ll pre-wire the gate. Our full range of gate services covers both paths, and our page on gate installation in Boulder City walks through what a new install includes.
BeforeBefore
AfterAfter

How We Price a Gate Install Before We Start

We don’t give a number over the phone and hope it holds. Under the Haven Standard Clause 1 (“Have it in writing”), the price is on paper and in your hands before any work begins. That written scope names the gate, the posts, the footings, the operator brand, the wiring run, and the permit requirement. What you read is what you pay.

Every visit also ends with a photo record. Under Clause 4 (“Evidence on every job”), we photograph what we found, what we set, and what we installed, and leave that record with you. Wiring diagrams, limit-switch readings, the part number of the hinge or the operator: it’s documented, and it stays in the job record. On a gate install, that means the next technician doesn’t have to rediscover how your gate was anchored or which operator you have. Our team has up to 12 years of experience on gates, and that experience shows up in what we write down, not just what we build.

How a Gate Install Runs, Step by Step

  1. Site visit and ground probe. We walk the gate line, check the slope, probe the footing ground for caliche, and note where power comes from. This is where the estimate takes shape.
  2. Written estimate. You get a line-item price: gate, posts, footings, hardware, operator, permits, and any electrical run. No “call for pricing” and no number that changes at the end.
  3. Permit and historic review. If your property falls under Boulder City permit or Historic Preservation Commission review, we file it. We tell you at the estimate stage whether your gate needs it.
  4. Footing and post set. We excavate, set rebar, and pour the footing to spec, then let it cure before the gate goes on. Rushing the cure is how gates sag six months later.
  5. Gate hang and operator install. The panel goes on, the hinges are set, and the operator and its wiring are installed and tested. Every limit switch is set and photographed.
  6. Walkthrough and photo record. We test the gate open and closed, set the safety photo-eye (the infrared beam that stops the gate if something crosses the path), and leave you the written record and photos.

How to Save on Gate Installation

professional gate installation service
How to Save on Gate Installation

There are a few honest ways to bring the price down without cutting the part of the job that keeps the gate standing.

  • Pre-wire when you install, even if you automate later. Running conduit and low-voltage wiring while the ground is already open is far cheaper than trenching a finished yard later. It’s the single biggest saving on a gate install.
  • Pick a standard gate design. A stock ornamental aluminum panel is cheaper than custom steel work. If your HOA allows it, standard keeps the material line down.
  • Get a free second opinion. If you’re holding a written estimate from another company, bring it in. We’ll review it at no cost and show you where a line looks high or where something’s missing. That review is free, and it’s happened more than once that the “cheap” quote left out the footing.
  • Combine the walk gate and driveway gate in one job. One footings pour and one trip for both gates is cheaper than two separate installs.
  • Call for a written estimate before you commit. The free estimate is where the savings actually start, because you can compare line items instead of guessing. Call (844) 320-7587 for yours.
Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs – Gate Installation Cost

How much does a driveway gate cost to install in Boulder City?

A single swing driveway gate, installed and automated, runs $4,200 to $7,500 in Boulder City. A double swing gate is $5,500 to $8,900, and a sliding gate is $4,800 to $9,500. Call (844) 320-7587 for an exact written quote on your property.

Is it cheaper to repair an existing gate or install a new one?

Repair is usually cheaper when the posts and footings are sound: a motor replacement runs $950 to $1,900 and an arm bracket is a fraction of a new install. A new gate makes sense when the posts are failing, the footing is gone, or the gate has rusted through. We’ll tell you in writing which one your gate needs, and we don’t steer toward replacement when a repair will hold. Call (844) 320-7587 to have us look.

Do I need a permit to install a gate in Boulder City?

Most gate installs that involve footings or electrical work need a Boulder City building permit, which runs $150 to $450. A gate on a street-facing wall inside the Historic District may also need to clear the Historic Preservation Commission. We flag both at the estimate stage and file the permit for you. Call (844) 320-7587 to confirm what your address needs.

Can you install a gate and opener the same day?

A walk gate or a gate swap on existing footings can often be done in a day. A new driveway gate with fresh footings takes longer because the concrete has to cure before the gate goes on, usually two to three days total. That cure time isn’t optional; skipping it is how gates sag. Call (844) 320-7587 and we’ll give you a realistic timeline with the written price.

How much does gate automation add to an install?

Automation adds $950 to $2,300 depending on the operator and whether it’s a swing or sliding gate. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule all fall in that range, and we service all nine. If you pre-wire at install, you save on the electrical run later. Call (844) 320-7587 for a written quote that breaks the operator out by brand.

Get a Written Gate Install Price in Boulder City

Professional technician performing wrought iron gate repair and installation
Get a Written Gate Install Price in Boulder City

You researched this page to see the number before you call anyone. That’s the right instinct. We work the same way: a written scope, a written price, and a photographed record of the job when we’re done. Our team has up to 12 years of experience on gates, and every install is backed by the 365-Day Done Right Promise. If a repair isn’t right, we make it right within that year at no extra charge.

Call (844) 320-7587 for a free estimate. A live person answers 24 hours a day, and we’ll come out, probe the ground, and hand you a written price before any work starts. Free second opinions on any written estimate you already have.

Pricing reflects the Boulder City market as of 2026. Vance Gate Repair Boulder City offers free estimates – call (844) 320-7587.

What Our Customers Say

★★★★★ 4.7 from 7+ reviews

"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."

- Wes A.

"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."

- Terrence B.

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

- Douglas N.
Need Gate Repair help in Boulder City? Licensed & insured · within the hour response · free estimates
Call (844) 320-7587

Request a Free Estimate

Tell us what's going on in Boulder City. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch