Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Motor & Opener for Boulder City Homeowners
A gate that won’t open is a driveway you can’t use and a property you can’t secure. Gate motor and opener service in Boulder City means diagnosing the operator itself – the arm, the control board, the limit switches, the safety photo-eyes – and fixing or replacing the part that failed so the gate moves on command again. Our technicians have up to 12 years of experience across nine major automation brands, and we quote a flat written price before anyone picks up a tool. Same-day motor repair is often available in Boulder City, and a live person answers the phone 24 hours a day at (844) 320-7587.
What Our Gate Motor & Opener Service Includes
Motor Installation
This is fitting a new operator to a gate that either has none or whose old unit is beyond economic repair. You need it when the existing motor has failed a control board, seized a gearbox, or no longer matches the weight and travel of the gate leaf. Vance Gate Repair Boulder City measures the gate first, checks hinge swing and post condition, then orders an operator sized to the actual load – a step people skip, which is why undersized motors burn out early in Boulder City’s summer heat. A free measure and a written price come before any equipment is ordered.

Motor Repair
Repair means fixing the operator you already own instead of selling you a new one. The common failures we find are worn drive gears, failed capacitors, mis-set limit switches, and control boards that took a lightning surge during a monsoon storm. We identify the exact fault with a meter and limit-switch readings, photograph what we found, and give you the written price for the fix. Under our 365-Day Done Right Promise, if that repair isn’t right within a year, we make it right at no extra charge.

Linear Motor
Linear has been a steady name in residential slide and swing operators for years, and its units fail in predictable ways – usually a tired battery in the backup, a stuck manual release, or a limit switch that has drifted. If you need Linear motor work in Boulder City, we service the operator rather than pushing a replacement. We photograph every adjustment and log the part numbers we install so the next technician (or the next homeowner) has a real record to work from.

Slide Motor
A slide motor drives a gate that rolls along a track instead of swinging open, and it’s a different animal from a swing operator – the track, the rollers, and the ground level all affect how the unit performs. Boulder City yards with gravel driveways and unseasonal ground movement tend to knock slide gates out of alignment, which makes a healthy motor labor and eventually trip its overload. We check the track and rollers before we blame the motor, then repair or replace what’s actually at fault.
Intercom Integration
An intercom lets you talk to whoever is at the gate before you open it – useful on a long drive, a gated side yard, or a property where you can’t see the entrance from the house. When a gate operator is replaced or a driveway is reconfigured, the intercom wiring often needs to be re-run and re-tested. We integrate intercoms with the operator, confirm the call button and release both work from inside, and leave a labeled wiring record of where everything terminates.
Battery Backup
Battery backup keeps the gate working when the power drops, which matters in Boulder City when a storm takes the grid down or a breaker trips. You need it if your operator has no backup, or if the gate now stops dead in an outage and the old battery won’t hold a charge. We test the battery under load rather than trusting a green light, replace it when it’s tired, and confirm the gate still opens and closes correctly on battery alone before we leave. For gate work beyond the motor, see our home page for the full range of services.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Motor & Opener

We work on nine major automation brands, and knowing how each one wears saves you money because we don’t guess. LiftMaster swing and slide operators are common on residential drives, and the failures we see most are worn drive gears and limit switches that have drifted out of position after years of use. DoorKing equipment, usually found on heavier gates and light commercial properties, tends to fail at the control board or the loop detector rather than the motor itself, so we test the board before assuming the operator is done.
Mighty Mule and Elite both show up on DIY-installed and builder-installed gates around Boulder City, and both have their own quirks – Mighty Mule operators often need a control board or battery swap, while Elite units are sensitive to hinge bind and voltage drop on long wire runs. We also service FAAC, BFT, Viking, Linear, and Ghost Controls. Whether you have LiftMaster, DoorKing, Mighty Mule, or any other make, we can help – and we won’t steer you toward a replacement when a repair will do.
Before
AfterSigns You Need Gate Motor & Opener Right Now
- The gate won’t move at all. If the operator is silent and the manual release works, the fault is usually power, a control board, or a dead battery backup. That’s a stop-what-you’re-doing problem because the gate is stuck in whatever position it failed.
- The gate opens partway and stops. This almost always points to a mis-set limit switch or an obstruction the safety photo-eye is reading. It’s fixable, but a gate that reverses unpredictably is a hazard to anyone walking through it.
- The motor strains or the gate jerks. Grinding, buzzing, or a gate that lurches and stalls means the drive is laboring – often a worn gear, a bound hinge, or a sagging slide track. Running it hard in that state shortens the life of the motor.
- The gate reverses on its own. A gate that closes and then reopens for no reason is usually reacting to a misaligned photo-eye (the infrared beam that stops the gate if something crosses its path). Don’t ignore this one; a reversing gate can pinch a person or a pet.
- The gate is dead in a power outage. If your operator has no working battery backup, you lose access the moment the grid drops. We test the battery under load so you know it will actually carry the gate when you need it.
If you’re seeing any of these, call (844) 320-7587 – we’ll tell you what to expect and get a technician scheduled.
Our Gate Motor & Opener Process – Step by Step

- 1
Phone diagnosis and scheduling. A live person answers at any hour and asks what the gate is doing – brand, model if you have it, and whether the manual release works. That short conversation usually narrows the fault before we arrive and tells us what to bring.
- 2
Arrival and inspection. The technician inspects the operator, the gate leaf, the hinges or track, and the wiring. We meter the power supply and the control board, read the limit-switch settings, and check the photo-eyes for alignment. Nothing gets adjusted until we understand what failed.
- 3
Written price before any work. Under The Haven Standard, you get a flat written price before a single tool comes out – the scope in plain language, no “call for a quote,” no surprise invoice at the end. If a repair from another company is already on the table, we’ll review that written estimate at no cost.
- 4
The repair or installation. We fix or replace the specific component at fault, set the limits to the gate’s actual travel, and re-test the safety edges and photo-eyes. For an install, we mount the operator, wire it, and run a full open-close cycle several times before we consider it done.
- 5
Documentation and hand-off. Before we leave, you get a photo log of every adjustment, the part numbers installed, and a written record of what we found and what we set. That record is filed in the job history, so nobody has to guess on the next visit.
This process sits under the Gate Motor & Opener in Boulder City service, and every step is built around The Haven Standard: written price, photo record, 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Boulder City?
Gate motor and opener costs in Boulder City depend mostly on whether you need a repair or a full replacement, and on the brand and weight of the gate. Here’s roughly what to expect:
| Service | Typical Range |
|---|---|
| Motor repair (limit switch, gear, control board) | $180 – $450 |
| Battery backup replacement | $120 – $280 |
| Slide or swing motor replacement (operator only) | $650 – $1,600 |
| Full new operator install, wired and tested | $1,200 – $2,800 |
| Intercom integration | $250 – $700 |
What moves the price: the brand and size of the operator, whether the gate itself needs hinge or track work, the length of the power and control run, and whether we’re setting limits on an existing unit or commissioning a new one. The most common way people overpay is replacing a healthy motor when a $200 component failed – which is why we test the board, the limit switches, and the power supply first. Your free estimate includes the inspection, the written scope, and the flat price before any work starts.
Gate Motor & Opener Near Boulder City – Our Service Area

We handle gate motor and opener work across Boulder City and the neighboring communities, including Henderson and Whitney. Response from the Henderson side is usually quick because those drives are short. For properties toward Paradise, Enterprise, or the Las Vegas valley, we’ll confirm timing when you call. If you’re closer to Henderson, our Gate Motor & Opener in Henderson page covers that side, and the Gate Motor & Opener in Whitney page covers Whitney.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Motor & Opener in Boulder City

A gate motor and opener is the automated operator – the arm or slide unit, control board, and safety hardware that opens and closes a driveway or side gate on command. It replaces a manual push with a remote, keypad, or intercom signal, and the safety photo-eyes stop the gate if something crosses its path. In Boulder City, most homes with a driveway gate run a swing or slide operator with a battery backup for outages.
Most motor repairs take one to two hours on site, while a full operator replacement or new install is usually a half-day to a full day. A dead battery or a misaligned photo-eye can be resolved quickly, but a control board or a gearbox job takes longer. For an install or a new gate, we measure, order, and schedule; repair jobs can often be handled the same day. Call (844) 320-7587 and we’ll give you a realistic window.
Motor repair typically runs $180 – $450, battery backup replacement $120 – $280, and full operator installation $1,200 – $2,800 depending on brand and gate size. The exact figure depends on the operator model, the condition of the gate and track, and the length of the wiring run. We give you a flat written price before any work starts – estimates are free, so call (844) 320-7587 for your exact quote.
Yes – we service LiftMaster, Mighty Mule, DoorKing, Elite, FAAC, BFT, Linear, Viking, and Ghost Controls. That means we can work on whatever motor is already on your property rather than pushing you toward a replacement. Each brand has its own common failure points, and we test the specific components most likely to fail before recommending any part.
Same-day motor repair is often available in Boulder City, and a live person answers the phone 24 hours a day. If your gate is stuck open or won’t close, tell us on the call and we’ll talk through the manual release so you aren’t stranded. Emergency availability depends on the day, so it’s worth calling (844) 320-7587 to confirm a window.
Every completed repair is covered by our 365-Day Done Right Promise – a full year for us to make the work right at no additional charge, with no argument and no fee within that window. That covers the repair we did, and the documentation we leave records exactly what was replaced. If something we touched fails within the year, call us and we’ll come back.
A full installation includes the operator, the mounting hardware, the wiring and power run, the safety photo-eyes, and the limit-switch setup for your gate’s actual travel. We commission the unit – open and close it several times, test the safety edges and the battery backup – then hand you the photo record and written scope. If you want to add intercom control or get a written quote for a new operator, call (844) 320-7587 for a free measure.
The Gate Repair service covers hinge, roller, and motor problems, while Gate Installation handles new gates and full replacements. For keypads, card readers, and remotes, see Gate Access Control, and for hardware and repair work, our Gate Parts & Welding page has the details.
Schedule Your Gate Motor & Opener Service in Boulder City Today
Whether it’s a Linear motor that won’t hold a charge, a Mighty Mule control board that failed, or a lift that needs sizing to your gate, Vance Gate Repair Boulder City can help. Call (844) 320-7587 for a free estimate – a flat written price before any work starts, a documented photo record before we leave, and the 365-Day Done Right Promise covering the work.
Written by the team at Vance Gate Repair.