Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunrise Manor
If your driveway gate is sagging, stuck open, or dragging on the concrete after a windstorm, we can help. Vance Gate Repair Boulder City handles gate repair throughout Sunrise Manor, from the tract homes off Lake Mead Boulevard to the older properties near Sloan Lane, and we answer the phone live around the clock. When you call, you get a real person, a clear answer on what’s likely wrong, and a price written down before anyone touches the gate. Call (844) 320-7587 for a free estimate.
Why Vance Gate Repair Boulder City Is Sunrise Manor’s Preferred Gate Repair Company
Sunrise Manor has a particular kind of gate problem, and it helps to work with people who understand it. Most of this community went up as post-war suburban tract housing, and a lot of the fences, gates, and hinge posts installed back then are still in place. We’ve learned that the sagging gate in a Sunrise Manor driveway usually isn’t a hinge problem at all; it’s a post problem, and we diagnose it that way from the first visit.
Every job here runs under The Haven Standard, which means a written price before work starts, a documented photo record of what we found and what we changed, and the 365-Day Done Right Promise covering the repair. Our technicians have up to 12 years of experience, and each one arrives background-checked, uniformed, with a name and photo provided before showing up. No surprise invoice at the end. No “call for a quote” runaround. If another company handed you a written estimate, bring it over and we’ll give you a free second opinion on it.
We work on whatever motor is already on your property, and we service nine major automation brands so we’re not steering you toward a replacement you don’t need. That matters in Sunrise Manor, where a fair number of gates are running legacy operators that nobody else wants to open up.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Sunrise Manor

Hinge & Post Repair
This is the repair we do most in Sunrise Manor, and it’s the one most homeowners get wrong. When a swing gate drags and sags, the hinge itself is rarely the culprit; the wood hinge post has usually rotted below grade where irrigation and desert temperature swings have quietly chewed through the footing. We pull the old post, set a new footing, and rehang the gate so the sag is actually corrected instead of propped back up. If the hinge plates have gone brittle or rust-seized, we replace them while we’re in there.

Automatic Gate Repair
Automatic gates in Sunrise Manor take a beating from the wind, and the failure often isn’t mechanical. Operators here regularly lose their settings, trip on a misaligned limit switch (the switch that tells the motor where the gate should stop traveling), or give up entirely on a control board that’s no longer made. We reset, re-align, and document the readings so the next person who opens the panel knows what they’re looking at. Our Gate Repair team can diagnose the operator and the gate structure together, since a motor straining against a bent gate will keep failing no matter how many times it’s reset.

Gate Realignment
A gate that’s out of square won’t close cleanly, no matter how much you adjust the latch. On 40-year-old Sunrise Manor gates, sun-baked wood panels and rust-seized metal hardware often make a simple realignment impossible without replacing the hinge plates and latch assembly first. We check the whole frame, not just the visible gate, and tell you honestly whether a realignment will hold or whether you’re throwing money at a gate that’s already beyond it.

Electric Gate Repair
Electric gates fail in ways that look like mechanical problems. A photo-eye (the infrared beam that stops the gate if something crosses the path) knocked slightly out of alignment will freeze a fully functional gate in the open position. We test the power run, the safety edges, and the control board as a system, then hand you a written record of exactly what we found and what we changed before we leave.
Before
AfterTrusted Brands We Service in Sunrise Manor
Gates in Sunrise Manor run on a wide spread of automation, and we work on whatever motor is already mounted on your property rather than pushing you toward a replacement. That includes older LiftMaster and Linear units that are still common on this side of the valley, along with DoorKing and Elite systems on the heavier driveway gates. We don’t keep a parts counter or claim to stock every board in town; we diagnose what you have, tell you what’s available, and give you a written price either way. Most repairs turn around quickly because the parts we need are orderable the same week, not hunted down for a month.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Sunrise Manor Homes

The tract homes here were built from the 1960s through the 1980s, and that building era shapes almost every gate problem we’re called out to.
- Rotted hinge posts below grade. Original wood hinge posts in 1960s – 1980s Sunrise Manor homes have often quietly rotted under the concrete, so the first 50 mph gust takes the whole swing gate down instead of just loosening a hinge. The fix is a new footing, not a tighter hinge.
- Obsolete control boards. Many driveway gates here still run on legacy operators, often older LiftMaster or Linear units, whose control boards fail with no replacement available. When that happens, board-level repair isn’t possible and a full operator swap is the only practical path.
- Sun-baked panels and seized hardware. The dry Mojave climate preserves wood but bakes it brittle, and metal hardware rusts or seizes after years of dust and heat. On 40-year-old gates, that means realignment only works if the hinge plates and latch assembly get replaced too.
- Wind-driven fatigue across the whole gate. Sunrise Manor sees winds over 50 mph most springs, and that constant push and torque loosens hinges, shifts posts, and fails latches faster than homeowners expect. After a windstorm we see a wave of sagging gates and bent hinges, especially where the posts were already compromised.
Pricing for Gate Repair in Sunrise Manor, NV
We price in writing before any work starts, so you know the number before anyone picks up a tool. A typical hinge and post repair in Sunrise Manor runs $350 – $750, depending on whether we’re setting a new footing and how much of the old hardware has to be replaced. Automatic gate repair, including limit switch and photo-eye work, usually lands between $180 – $450. A full realignment on a 40-year-old gate runs $250 – $500, and a full operator replacement on a legacy control board that’s no longer supported runs $950 – $1,800 for the unit and installation, depending on the brand and whether the power run is sound. Those are real ranges, not teasers. What moves the number is footing condition, whether the hinge plates survive, and whether the operator needs a full swap. The estimate is free, and the written price is handed over before we start.
We Also Serve Cities Near Sunrise Manor

We take gate repair calls across the east valley and the surrounding communities, including Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside Sunrise Manor, reach out and we’ll tell you honestly whether we’re the right fit for the job. You can read more about our coverage on the Sunrise Manor page, or just call and we’ll sort it out.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Sunrise Manor

Usually not at the board level. Most control boards from that era are long out of production and no replacement exists, so the practical answer in Sunrise Manor is a full operator swap rather than a board repair. We’ll check the power run, the safety edges, and the motor first to confirm the board is really the failure, then give you a written price on a replacement before anything is ordered.
Because the hinge usually isn’t the problem. On Sunrise Manor tract homes from the 1960s through the 1980s, the wood hinge post has often rotted below grade, so it’s the post that’s moving, not the hinge. Tightening the hinge just masks it until the next gust. A proper fix means pulling the post, setting a new footing, and rehanging the gate, and we’ll photograph the footing condition so you can see exactly what we found.
Start with the hinge post, not the latch. In Sunrise Manor, a gate that won’t catch after a windstorm almost always has a post that’s shifted or rotted below grade, which throws the whole gate out of square. Check whether the gate is dragging on the ground or leaning at the top. If it is, the latch won’t hold no matter how you adjust it, and you’re looking at a post and footing repair.
Yes. If the gate is automatic, UL 325 requires entrapment protection, and many legacy openers around Sunrise Manor have never had it tested. A photo-eye that’s misaligned by even a couple of inches can stop the gate from moving or let it close on something in the path. We test the full safety system on every automatic gate visit and tell you plainly whether it’s compliant.
Often yes, but it depends on the operator’s control terminals and whether the board accepts external inputs. Some legacy operators in Sunrise Manor have open terminals for a keypad or loop detector, and some don’t, which is when the retrofit turns into a board or operator swap. We’ll check the terminals and give you a written price on the retrofit before we commit to anything.
If your gate is sagging, stuck, or running on an operator that’s seen better days, call (844) 320-7587 for a free estimate. A live person answers any hour, and you’ll have a written price in hand before any work starts.
Written by the team at Vance Gate Repair Boulder City.